FILE LOCATION: C:\A-2003 Working Folder\All PowerConnect\E-Doc Posts\Eng UG rev\7H905ch.fm
RJ-45 10/100-Mbps Switch Ports
There are either 16 or 24 RJ-45 connectors on the front panel of the switch. The switches provide 10/100-Mbps switching ports that can sense the 10/100M speed and negotiate full or half-duplex mode automatically. These switching ports allow users to connect the switches to 10Base-T and 100Base-TX devices.
Cascading to a Switch or Hub
Each port supports Auto MDI & MDI-X functionality. When cascading with other switches or hubs, each port can connect directly to a switch or hub with straight through twisted pair cable.
Connecting to Desktop Systems
By connecting a switch to desktop systems, you can form a small network. To improve network efficiency, use 100-Mbps full-duplex operation between the server and switch if the LAN adapter on the server can operate in full- duplex mode.
Mounting Kit Instructions
The switch is supplied with mounting brackets and screws for rack mounting, and rubber feet for stationing it on a flat surface.
DELL CONFIDENTIAL – PRELIMINARY 6/3/03