Clarion OHM107VD manual Safety Information

Page 3

Safety Information

!CAUTION

Do not operate this product in any way other than described within this Owners Manual. Failure to follow the instructions within it will invalidate your warranty.

SAFETY FIRST! Do not install the display where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including airbags, or (iii) impair the driver’s ability to safely operate the vehicle.

When using the system, make sure you are firmly secured by your seat belt to ensure you do not accidentally hit your head on the screen during sudden braking or other incidents. If you are ever in an accident, injuries can be more severe if the seat belt is not properly buckled.

Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous. Visit www.clarion.com.au for your nearest Authorised Clarion Dealer for professional installation.

To avoid draining the battery it is suggested that you not use this product for extended periods without the vehicle engine running.

Do not disassemble or alter this product in any way. Failure to observe this warning can cause damage to the unit and void the warranty.

Never clean the surface of the screen with a chemical solvent or a corrosive detergent. Doing so may cause permanent damage to the TFT LCD screen.

Avoid installing this product under direct sunlight or near a hot air vent. Please note that its normal working temperature is from -5°C to +50°C. If the internal temperature of the vehicle is extremely high, a short cooling down period is necessary before operating the product.

If the temperature inside the car is very low and the monitor is used soon after switching on the heater, moisture may form on the TFT LCD panel. Turn off the unit immediately! Failure to do so may cause the internal components to short. Allow the unit to rest to allow the condensation to disappear before you continue operation.

In extremely cold temperatures, the movement of the picture may be slow and the image may appear dark. This is not a malfunction and normal function will resume once the TFT LCD reaches its operating temperature range.

Do not drop or hit the TFT LCD panel with a hard object, as it may cause permanent damage. Should the TFT LCD panel break, avoid touching the glass and/or fluid. If you injure yourself as a result of such contact clean the wound with plenty of water and seek immediate medical attention.

Due to different vehicle specifications, please kindly ensure that the display monitor is properly located and not obstructing the air-conditioning vent.

Avoid inserting any foreign objects into the slot of the disc player. Failure to observe this may void your warranty and cause damage to the mechanism of this unit.

Protect your disc!. When you leave the car, be sure to eject any disc from this unit and store it away from direct sun light.

Heat and humidity may warp, damage or erase your discs and you may not be able to play

them again.

• Use the supplied screws to fix the OHM107VD Metal Mounting Plate.

English

OHM107VD 

Image 3
Contents OHM107VD Contents Safety Information Disc Playback DVD Video FeaturesControls and Functions Controls and Functions Remote Unit Name Function or control Controls and Functions Remote UnitEnglish Basic DVD Operation OperationsMuting the sound Accessing the DVD root menuUsing Repeat Playback Playing a Disc NotesMP3 Icons Using ZoomPlaying Audio CDs Playing MP3 CDsSystem setup Using the OSD MenuAdjusting the picture response Screen Saver Customizing DVD settingsStorage MaintenanceProblem Cause Solution TroubleshootingPackage Contents SpecificationsWiring and connections InstallationInstalling the player Push the holder back Installing remote control batteryPull out the battery holder Place the batteryEnglish OHM107VD