Compex Systems WPE54G manual Specify an IP address

Page 11

Chapter 4

TCP/IP Configuration

Select the radio button for

Specify an IP address.

Enter the IP Address and Subnet Mask as 192.168.168.X and 255.255.255.0, where X can be any number from 2 to 254, except for 1. In this example, we are using 192.168.168.160 as the static IP Address.

In order to check if the IP address has been assigned correctly to your PC, simply go to the Start menu, select Run, and enter the command winipcfg.

Select your respective Ethernet Adapter from the drop down list and click OK.

Now, your PC is now ready to configure Compex WPE54G. Please refer to the User’s Manual in the Product CD for more details on configuring Compex WPE54G.

9

Image 11

Contents Quick Install Guide To the Web interface manually TU Packaging UT Content TUTo the Web interface with uConfig TU Introduction Packaging Content WPE54G Let’s Get Going-Hardware SetupAccess to the Web interface with uConfig Access to Web-based InterfaceChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Properties button TCP/IP ConfigurationFor Windows 95/98/98SE/ME/NT Specify an IP address For Windows XP/2000 Chapter TCP/IP Configuration Panel Views and Descriptions DC 3.3V 3A Reset buttonTechnical Specifications Profile Backup LED IndicatorsPower Requirements Through Configuration InterfaceWeight SafetyPower Requirements Input Voltage Physical DimensionsComputer and receiver Ices 003 Statement Warranty Registration Card ManualUNumberU 0436-V1.4C Version August