Compex Systems WPE54G manual Let’s Get Going-Hardware Setup

Page 5

Chapter 2

Let’s Get Going - Hardware Setup

2: Let’s Get Going-Hardware Setup

Use the RJ45 cable to connect the Ethernet port of the WPE54G to your PC.

Once you have finished configuring your WPE54G, you can connect the Ethernet cable to your network device, such as to a switch or hub.

Next, attach the power adapter supplied in the packaging to the main power supply and connect its power plug into the DC jack of the WPE54G.

Main Electrical Supply

 

RJ45

 

Compex

Ethernet

PC

Cable

 

WPE54G

 

 

 

Power ON your PC. Notice that the Power and LAN LEDs have lighted up. This indicates that the connection has been established successfully between your Compex WPE54G and your PC.

3

Image 5
Contents Quick Install Guide To the Web interface manually TU Packaging UT Content TUTo the Web interface with uConfig TU Introduction Packaging Content WPE54G Let’s Get Going-Hardware SetupAccess to the Web interface with uConfig Access to Web-based InterfaceChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Properties button TCP/IP ConfigurationFor Windows 95/98/98SE/ME/NT Specify an IP address For Windows XP/2000 Chapter TCP/IP Configuration Panel Views and Descriptions DC 3.3V 3A Reset buttonTechnical Specifications Power Requirements LED IndicatorsThrough Configuration Interface Profile BackupPower Requirements Input Voltage SafetyPhysical Dimensions WeightComputer and receiver Ices 003 Statement Warranty Registration Card ManualUNumberU 0436-V1.4C Version August