Comprehensive Video CVG-808xl, CVG-606xl user manual Feature Function Power Switch, Buttons, Labels

Page 7

Figure 1: CVG-606xlFront/Rear Panel Features

 

 

Table 1: CVG-606xl Front Panel Features

 

 

 

No.

Feature

Function

 

 

 

1.

Power Switch

Illuminated switch: supplies power to the unit.

2.

OUTPUT SELECTOR

Select the desired output that the input signal is switched to.

 

buttons

 

3.

INPUT SELECTOR

Select the desired input to be switched to the output.

 

buttons

NOTE

 

 

Pressing input buttons "1", "2" and "3"

 

 

together resets the machine and performs a

 

 

7-segment display test.

 

 

 

4.

OUTPUT STATUS

Identifies a crosspoint between each output and the input below it.

 

labels

 

5.

INPUT STATUS

Displays the selected input switched to the output (marked above each input).

 

display

 

6.

RCL illuminated button

Should be pressed, followed by an input or output pushbutton to select a

 

 

predetermined setup (1-6 available setups for the CVG-606xl and 1-8 setups for

 

 

the CVG-808xl. For example, press RCL followed by INPUT 4 button to recall

 

 

Setup # 4 from the non-volatile memory.

6

Image 7
Contents CVG-606xl Contents Introduction Figures CVG-606xl CVG-808xl Word on Video/Audio SwitchersIntroduction Factors Affecting Quality of ResultsHOW do I GET STARTED? SpecificationsGetting to Know Your Matrix Switcher Unpacking and ContentsButtons Feature Function Power SwitchIlluminated switch supplies power to the unit Select the desired input to be switched to the outputSync Select switch Feature FunctionUsing the Machines InstallationConnecting to Video Devices Connecting to Audio DevicesUsing the Audio Follow Video Mode Connecting a Video/Audio Input/OutputDisconnecting a Video/Audio Input Connecting a Video/Audio Input to All OutputsRS-232 and RS-485 Operation Setting the Configuration SwitchesDIP Switches Configuration Selecting the Sync SourceRS-232 Control Connector Wiring Component Switching using Multiple Matrix Switchers Basic Video-Audio SetupTypical Applications Taking Care of Your Matrix Switcher 10.2.1 RGB/YUV Switching with RS-232 e.g. PC ControlProblem Remedy TroubleshootingPower and Indicators Video SignalControl Audio SignalCommunication Protocol Switching MalfunctionsBit 7 Defined as Bits 4-6 Defined as O3 O0 Output 0000 1000 0011 Table of HEX Codes for the Master CVG-808xl OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT