Comprehensive Video CVG-606xl, CVG-808xl user manual Feature Function, Sync Select switch

No.	Feature	Function
7.	STO illuminated button	Should be pressed, followed by an input or output pushbutton to store the current
		status in the non-volatile memory. For example. Press STO followed by INPUT
		4 button to store Setup # 4 in the non-volatile memory.
		NOTE
		To delete a setup from the memory, press the
		STO and RCL buttons simultaneously, followed
		by the input button (Setup number) to be
		deleted.
8.	AFV illuminated button	When pressed, illuminates and selects the "Audio Follow Video" function. If the
		audio configuration differs from the video configuration, the INPUT STATUS
		display flashes the audio outputs that are to be reconfigured for AFV operation. In
		such case, the TAKE button must be pressed to confirm the modification.
9.	AUDIO	When pressed, illuminates and selects the audio mode (Breakaway) to enable
		modification of the audio crosspoints.
10.	VIDEO	When pressed, illuminates and selects the video mode (Breakaway) to enable
		modification of the video crosspoints.
11.	TAKE	The machines can operate either in "Take" mode or in "Normal" (no user
		confirmation for each action is needed) mode. Pressing the TAKE button toggles
		the mode, and the button illuminates when in "Take Mode". In "Take Mode", any
		action would cause the TAKE button to blink before implementation, and the user
		is required to press TAKE again in order to implement the operation.
		NOTE
		To cancel any operation initiated by pressing a
		button, press the same button again.
12.	OFF	When pressed after pushing an output button, disconnects that video/audio output
		from the video/audio input. To disconnect all the outputs, press the ALL button
		followed by the OFF button.
13.	ALL	When pressed followed by an input button, connects that audio/video input to all
		audio/video outputs.
		Table 2: CVG-606xl Rear Panel Features
No.	Feature	Function
1.	1-6 AUDIO INPUTS	Audio inputs used to connect the stereo audio input sources.
	RCA connectors
2.	1-6 AUDIO OUTPUTS	Audio outputs used to connect the stereo audio output acceptors.
	RCA connectors
3.	RS-485terminal block	Used for bi-directional communication with another Matrix Switcher or PC
		through RS-485 interface (see section 9.4 for more details concerning the RS-
		485 operation).
4.	EXT. SYNC BNC	Used for connection of an external video sync input. The external sync input
	connector	can be selected by the SYNC Select switch.
5.	SYNC Select switch	Selects either an external sync from the external source, or internal sync, which
		is normally inputted via the VIDEO INPUT #1 connector (see section 9.3.1 for
		more information concerning the sync selection).
6.	VIDEO INPUTS BNC	Video inputs used to connect the video sources.
	connectors
7.	VIDEO OUTPUTS BNC	Video outputs used to connect the video acceptors.
	connectors

8.DB-9 female RS-232Used for control of the Matrix Switcher (see section 9.4 for more details

connector	concerning the RS-232 operation) from a PC, or remote control device, through
	an RS-232 interface and a null-modem adapter (provided with the machine).
	NOTE
	7