Locking

Pressing for one second locks the doors (if the door locks are con- nected) and activates the starter kill. The horn will honk (if connected) and the parking lights will flash once to confirm arming of the system. While the system is locked, the status LED will flash once per second. The Starter Kill (if installed) will also prevent the vehicle’s starter from cranking.

The system can also be programmed to arm the optional Starter Kill automatically (called Passive Mode). If the system has been pro- grammed for Passive Mode, the Starter Kill will automatically activate 30 seconds after the ignition has been turned off. After the ignition has been turned off, the status LED will flash rapidly to indicate that the sys- tem is in Passive Mode.

If Passive Mode has been programmed on, then it is also possible to pro- gram the system for Passive Locking. With Passive Locking, the vehicle doors lock automatically at the same time that the Starter Kill is acti- vated. If Passive Locking is programmed on, care must be taken to pre- vent the keys from being locked in the vehicle.

NOTE: For Passive Mode to be effective, the Starter Kill relay must be installed.