Clarion Model RK1 manual When you are ready to drive the vehicle

Page 15

When you are ready to drive the vehicle:

1. Insert the ignition key and turn it to the RUN (not the START) po- sition.

2. Press the brake pedal.

Note: If the brake pedal is pressed before the key is in the ON posi- tion, the engine will shut down.

While the vehicle is running during remote engine start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs:

zThe brake pedal is pressed.

zThe hood is opened.

zThe shutdown toggle switch is put into the OFF position.

zThe pre-programmed run time (12, 24, or 60 minutes) has elapsed.

zRemote button is pressed twice in 3 seconds to start the vehicle.

12

Image 15

Contents Model RK1 LED Limited lifetime consumer warrantyPage Table of contents Standard configuration Controls the Lock/Panic ON/Panic OFF function+ controls Turbo/Short Run What is included System maintenanceImportant information FCC/ID notice Remote functionsButtons Standard configurationButton Auxiliary output controls ButtonUsing your system Page Locking Location of Override Switch UnlockingDisabling the starter kill without a remote Override mode Panic modeTo enter or exit override mode To remote engine start the vehicle Remote engine startWhen you are ready to drive the vehicle To activate Take-over modeTo perform Take-over mode Short-run/turboTimer mode Location of Shutdown Switch Starter anti-grind circuityDisabling the remote engine start system Programming options Power-upPage Glossary of terms Convenience expansions Page Page Page To disable the remote engine start system To lock using your remoteTo unlock using your remote To activate panic modeGet Started Get Protected