Edimax Technology BR-6218Mg user manual WAN Settings, Pptp, L2TP

Step 2) WAN Settings

In this section you have to select one of four types of connections that you will be using to connect your broadband router’s WAN port to your ISP (see screen below).

Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of connection it requires.

Parameter		Description
Dynamic IP		Your ISP will automatically give you an IP address
Static IP Address	Your ISP has given you an IP address already
PPPoE		Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
		connection.
PPTP		Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP)
		connection.
L2TP		Your ISP requires you to use a Layer Two Tunneling Protocol (L2TP)
		connection.

Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2, 1.3, 1.4, 1.5 or 1.6). Click on Back to return to the previous screen.

13