the same community name can connect to the device.
Permission: The permissions granted to users connecting using this interface (No Access, Read, Read/Write).
Description: A brief description of the connecting users for the administrator’s reference.
Receiver IP Address: The IP address of the computer that should receive trap events.
Community: The SNMP community name that the device belongs to. Only SNMP clients with the same community name can receive the trap event.
Severity: Set the level of trap events to accept:
•Information: Receive all traps.
•Warning: Receive only “warning” and “severe” traps.
•Severe: Receive only “severe” traps.
Acceptance: Set whether or not to turn the traps on.
Description: A brief description of the trap recipient for the administrator’s reference.
Events: Clicking this button opens up a window where you can select exactly which traps to send (Figure 21). The events listed under “ENV Events” require a freeView Power M2 module to be installed in the device.
Figure 21 – SNMP Events
20