freeView Power 80 User Manual
2.4External Components
The following diagrams show the front and rear panels of the freeView Power 80 (Figures 2 and 3).
Figure 2 – Front Panel
Figure 3 – Rear Panel
Phone Control Port
Connecting the freeView Power 80 to an analog telephone port will allow the device to be controlled by dialing the telephone number associated with the phone port. The second telephone port is used to connect an analog telephone to so calls can still be made out using that line.
Daisy Chain Link Port
Up to 8 units can be stacked together using the provided
Daisy Chain LED (Yellow)
For units that are stacked together, the Daisy Chain LED indicates the ID of the current unit. The master unit will have all LEDs off.
Power LED (Red)
The LED will be on when the receptacle is receiving power.
The LED will be off when the receptacle is not receiving power.
The LED will flash when there is a problem with the receptacle.
5