B&B Electronics Optically Isolated Single Port PCI Bus CE manual Windows 2000 Professional

Page 13

Windows 2000 Professional

This section covers device driver installation for

Windows 2000 Professional.

1.Configure the port on the PCI card to the desired RS- 232/422/485 mode using the jumpers.

2.Install the card in the slot, start the computer as an Administrator or ask your system administrator to install the software.

3.Windows will detect the PCI card and start Found New Hardware Wizard to begin driver installation. When installation is complete, Windows will set the hardware addressing & interrupt using the drivers and the Plug and Play function of the Operating System.

4.Installation will install one driver for the PCI Serial card, and a second driver which is used to assign a Com port to the card.

5. Click Next to continue.

Documentation Number 3PCIOSD1x-3903m Manual

Chapter 3

21

6. Select Search, Click Next.

7. Insert the driver disk in the Floppy disk drive A: Click Next.

22

Chapter 3

Documentation Number 3PCIOSD1x-3903m Manual

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RS-232/422/485 Serial Card Table of Contents Specifications FeaturesGeneral Information IntroductionAccessories Silk Screen Plot of 3PCIOSD1x PCB Setup InspectionRS-422 Mode RS-232 ModeName Description Direction DB25M Pin RS-485 Mode RS-422 and RS-485 Termination Installing the CardRS-485 Network Biasing Baud Rate OptionWindows 95 and Windows Windows InstallationClick Next. W95 Skip to step Select Floppy disk drives, Specify A\Click Next. W95 Driver name not shown Removal of Card And Drivers Windows 2000 Professional Documentation Number 3PCIOSD1x-3903m Manual Chapter Removal of Card & Drivers Windows NTSelect Add/Remove Programs Open the Control Panel, select Ports Next Open System32 Removal of Card and DriverUSA Office TroubleshootingEuropean Office Port 1 I/O Schematic Appendix a 3PCIOSD1x I/O SchematicDocumentation Number 3PCIOSD1x-3903m Manual Appendix a RS-232 Pinouts Name Description Direction Appendix B RS-232 & RS-422/485 PinoutsRS-422/485 Pinouts Name Description Direction Documentation Number 3PCIOSD1x-3903m Manual Appendix BJumpers RS-232 RS-422 RS-485 Appendix C Jumper Mode TableDocumentation Number 3PCIOSD1x-3903m Manual Appendix C Documentation Number 3PCIOSD1x-3903m Manual Appendix D Appendix D Troubleshooting with COMTestDocumentation Number 3PCIOSD1x-3903m Manual Appendix E Appendix E Isolation and GroundInstall the PCI/USB COM Port Utilities Renaming PCI COM Ports Using the PnP COM Rename UtilityUsing PnP COM Rename Appendix F Renaming COM Ports Win 95/98/MEDocumentation Number 3PCIOSD1x-3903m Manual Appendix F Documentation Number 3PCIOSD1x-3903m Manual Appendix G Appendix G Declaration of Conformity
Top Page Image Contents