B&B Electronics Optically Isolated Single Port PCI Bus CE, 3PCIOSD1x-3903m manual Next

Page 17

12. Verify 1 new COM Port. (shown here as COM5)

If you have 1 new COM port, the installation is complete. Select the port, select Settings, Advanced. You should obtain the message, "There are no user configurable Advanced I/O parameters for this COM port."

Check the port with your software or with a Loopback test.

NOTE: In the above example, a serial mouse is connected to the port which would usually be COM1. NT does not show it. COM2 is the second built-in serial port.

continued next page

Documentation Number 3PCIOSD1x-3903m Manual

Chapter 3

29

You can check details of the serial card setup using Windows NT Diagnostics, found under Administrative Tools. This can show the Resources used such as addresses and IRQ.

Windows Diagnostics will not allow changing anything.

The above shows one port using PCI card interrupt.

continued next page

30

Chapter 3

Documentation Number 3PCIOSD1x-3903m Manual

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104	B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445	B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445

Image 17

Contents RS-232/422/485 Serial Card Table of Contents Specifications FeaturesGeneral Information IntroductionAccessories Silk Screen Plot of 3PCIOSD1x PCB Setup InspectionName Description Direction DB25M Pin RS-232 ModeRS-422 Mode RS-485 Mode RS-422 and RS-485 Termination Installing the CardRS-485 Network Biasing Baud Rate OptionWindows 95 and Windows Windows InstallationClick Next. W95 Skip to step Select Floppy disk drives, Specify A\Click Next. W95 Driver name not shown Removal of Card And Drivers Windows 2000 Professional Documentation Number 3PCIOSD1x-3903m Manual Chapter Select Add/Remove Programs Windows NTRemoval of Card & Drivers Open the Control Panel, select Ports Next Open System32 Removal of Card and DriverEuropean Office TroubleshootingUSA Office Documentation Number 3PCIOSD1x-3903m Manual Appendix a Appendix a 3PCIOSD1x I/O SchematicPort 1 I/O Schematic RS-232 Pinouts Name Description Direction Appendix B RS-232 & RS-422/485 PinoutsRS-422/485 Pinouts Name Description Direction Documentation Number 3PCIOSD1x-3903m Manual Appendix BDocumentation Number 3PCIOSD1x-3903m Manual Appendix C Appendix C Jumper Mode TableJumpers RS-232 RS-422 RS-485 Documentation Number 3PCIOSD1x-3903m Manual Appendix D Appendix D Troubleshooting with COMTestDocumentation Number 3PCIOSD1x-3903m Manual Appendix E Appendix E Isolation and GroundInstall the PCI/USB COM Port Utilities Renaming PCI COM Ports Using the PnP COM Rename UtilityUsing PnP COM Rename Appendix F Renaming COM Ports Win 95/98/MEDocumentation Number 3PCIOSD1x-3903m Manual Appendix F Documentation Number 3PCIOSD1x-3903m Manual Appendix G Appendix G Declaration of Conformity