j ) Windows then copies the files and may ask you to insert a Windows disk . Insert the disk and click “OK”.
k) Reboot your PC.
To check the installation go to Control Panel (Start/Settings/Control Panel). Click on the Device Manager tab, click on Adapter, and double click on the adapter that you installed.
3.1 Additional Configuration Information
You may need to configure the adapter card using the configuration utility that came with your PCMCIA drive. If so, use these parameters.
| Product Name |
| Ethernet |
|
|
|
|
|
|
| Configuration Index |
| 0x20, (0x21, 0x22, 0x23) | |
|
|
|
|
|
| I/O Port Address |
| 0x300 (0x320, 0x340, 0x360) | |
| I/O Length/ Size |
| 32 bytes |
|
|
|
|
|
|
| I/O Bus Width |
| 16 bit | |
| IRQ |
| 3, 4, 5, 9, 10, 12, 15 |
|
|
|
|
|
|
| Memory Windows |
| Disabled | |
|
|
|
|
|
6 |
| Documentation Number ETCIACT0698 Manual | ||
B&B Electronics
PH (815)