Mounting Method

Mounting

Mounting Bracket Installation

Step 1 : Insert the controller through the panel cutout.

Step 2 : Insert the mounting bracket into the mounting groove at the top and bottom of the controller

Step 3 : Push the mounting bracket forward until the bracket stops at panel wall.

Step 4 : Insert and tighten screws on bracket to secure the controller in place. (The screw torque should be 0.8kgf-cm to 1.5kgf-cm)

DTB4824 Mounting Method:

CT Wiring Method (if CT function is selected)

DTB4848/4896/9696 Mounting Method:

0 6 . 8 m

M a x .

Error Acknowledge and Display

Communication error code response description:

		Error status 102EH/4750H		PV read back 1000H/4700H		Error status

			0001H	N/A		PV unstable
			0002H	8002H		Re-initial, No temperature at this time
			0003H	8003H		Input sensor did not connect
			0004H	8004H		Input signal error
			0005H	N/A		Over input range
			0006H	8006H		ADC fail
			0007H	N/A		EEPROM read/write error
Display message:

			Power ON			Normal display
	PV		DTB series, Firmware V1.50		Present value
	SV		Output VR type with Event option		Set value
			Sensor didn’t connect			Input error
	PV		No		Error
	SV		Connect		Input

			EEPROM error			Input over range
	PV		Error		PV flash when over
	SV		EEPROM

DTB Series specifications

B&B Electronics, a well-regarded player in the field of industrial communication technologies, has made a significant impact with its DTB Series of data transport bridges. Designed for robust data transmission, these devices address the needs of industries that require reliable and efficient communication solutions.

One of the standout features of the DTB Series is its capability to handle multiple communication protocols. This versatility allows users to connect devices operating under different standards without the need for multiple converters, simplifying integration within existing systems. Each model in the series supports various serial communication standards, including RS-232, RS-422, and RS-485, offering the flexibility to cater to a wide range of applications.

The DTB devices leverage advanced technologies to ensure high-speed data transmission. With support for data rates up to 115.2 kbps, they enable rapid communication across significant distances. This is particularly beneficial in settings where timely data exchange is critical, such as in manufacturing floors or utility management systems. Moreover, the devices are engineered to maintain data integrity, employing robust error-checking mechanisms and reliable power supply options.

Characteristically, the DTB Series is built for durability and longevity in demanding environments. The rugged housing of these devices provides protection against dust, moisture, and electromagnetic interference, which are common issues faced in industrial settings. This durability ensures that the DTB devices can perform consistently even in harsh conditions.

Additional features include LED indicators for monitoring power and communication status, which enhances user control and troubleshooting capabilities. With an easy-to-install design, the DTB Series allows for seamless integration into existing systems, reducing the time and effort required for setup.

Furthermore, the DTB Series embodies adaptive technology, supporting automatic configuration and a variety of mounting options, including DIN rail and panel mount installations, providing users with flexibility in deployment.

In conclusion, B&B Electronics' DTB Series stands out as a highly reliable solution for industrial data communication. Its combination of protocol versatility, high-speed performance, rugged construction, and user-friendly design makes it an ideal choice for industries seeking to enhance their communication infrastructure. Whether in factory automation, transportation, or utility management, the DTB Series provides the necessary tools to facilitate seamless and efficient data transport.