B&B Electronics 3PXCC2a, 3PXCC1A, 3PXCC2b manual Checking Windows 2000 for Available Address/IRQ’s

Page 11

Adding Serial Port(s) in Windows NT 4.0

Go to Start Menu / Settings / Control Panel.

Double-click on Ports.

Click Add.

Choose COM Port Number, Base I/O Address, and IRQ that you want to use for the new Serial Port(s) being added.

After clicking OK, you will see a screen – System Setting Change. Click the button Restart Now to restart Windows NT 4.0.

At this point you can shut down the system and physically install your B&B Electronics Serial Card into an available ISA slot. Double check to make sure the addresses and IRQ’s on the Serial Card are set to the correct settings.

Documentation No.3PXCC1x-2x-3903

17

Checking Windows 2000 for Available Address/IRQ’s

Click on Start / Settings / Control Panel.

Double-click on System.

Click on Hardware.

18

Documentation No.3PXCC1x-2x-3903

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RS-232/422/485 Serial Cards CE Table of Contents Introduction and General Information FeaturesSpecifications Use ESD precautions for safe handling Quick Installation GuideDocumentation No.3PXCC1x-2x-3903 Adding Serial Ports in Windows 95/98 Click Next Changing COM Port Resources in Windows 95/98 Select Basic Configuration 0007 or last one Documentation No.3PXCC1x-2x-3903 Adding Serial Ports in Windows NT Checking Windows 2000 for Available Address/IRQ’sClick on View top of screen. Click on Resources by type Adding Serial Ports in Windows Documentation No.3PXCC1x-2x-3903 Documentation No.3PXCC1x-2x-3903 Documentation No.3PXCC1x-2x-3903 Silk Screen Plot of 3PXCC PCB Address and IRQ Setting Address Switch SetupInterrupt Jumper Setup COM1 IRQ4 COM2 IRQ3 COM3 COM4 Standard IRQ SettingsRS-485 Mode Communication Jumper SettingsRS-232 Mode RS-422 ModeRS-485 Operation High Speed ModeRS-422 and RS-485 Termination Pinouts Physical Hook-up and TroubleshootingEuropean Office TroubleshootingCommunication Cable Data International/USA OfficeMap of AT Class Machines Appendix a Hardware I/O MapMap of XT Class Machines Declaration of Conformity Appendix B Declaration of Conformity Statement
Top Page Image Contents