Avaya SM61 manual Step Description Administer Route Pattern, Administer AAR Analysis

Step				Description
15.	Administer Route Pattern
	Use the change route-patterncommand to create a route pattern that will route fax calls
	to the SIP trunk that connects to the FaxFinder server.
	The example below shows the route pattern used for the compliance test at the Main Site.
	A descriptive name was entered for the Pattern Name field. The Grp No field was set to
	the trunk group created in Steps 12–13. The Facility Restriction Level (FRL) field was
	set to a level that allows access to this trunk for all users that require it. The value of 0 is
	the least restrictive level. The default values were used for all other fields.
	change route-pattern 12							Page	1 of	3
		Pattern Number: 12			Pattern Name: To SM
			SCCAN? n		Secure SIP? n
	Grp FRL NPA Pfx Hop Toll No.			Inserted					DCS/ IXC
	No	Mrk Lmt List Del		Digits					QSIG
			Dgts						Intw
	1: 12 0								n	user
16.	Administer AAR Analysis
	Automatic Alternate Routing (AAR) was used to route calls to FaxFinder via Session
	Manager. Use the change aar analysis command to create an entry in the AAR Digit
	Analysis Table for this purpose. The example below shows entries previously created for
	the Main Site using the display aar analysis 0 command. The 3rd highlighted entry
	specifies that 5 digit dial string 40000 was to use route pattern 12 to route calls to the
	FaxFinder server at Site A via Session Manager. The dial string 45000 (the FaxFinder
	server at Site B) used Route Pattern 15 to route calls between Communication Managers.
	change aar analysis 0							Page	1 of	2
			AAR DIGIT ANALYSIS TABLE
				Location: all				Percent Full: 1
	Dialed	Total		Route		Call	Node	ANI
	String	Min	Max	Pattern		Type	Num	Reqd
	10	4	4	4		aar		n
	3	5	5	12		aar		n
	40000	5	5	12		aar		n
	45000	5	5	15		aar		n

RAB; Reviewed:	Solution & Interoperability Test Lab Application Notes	17 of 34
SPOC 7/12/2011	©2011 Avaya Inc. All Rights Reserved.	FaxFinder_SM61