Avaya S8500 manual Network interfaces, Configuring an Ethernet connection

Using the Avaya Remote Supervisor Adapter

Alerts

•Factory settings string [default: AT&FO^M]: Type the initalization string to return the modem to factory settings.

•Auto answer [default: ATSO=3^M]: Type the initialization string to tell the modem to answer an incoming call after three rings.

•Escape string [default: +++AT^M]: Type the initialization string to return the modem to a command mode state when the modem is busy.

•Auto answer stop [default: ATSO=O^M]: Type the initialization string to tell the modem to stop answering the phone when it rings.

•Caller ID string [default: no default]: Type the initialization string that will be used to collect caller ID information from the incoming call.

•Escape guard [default: 2.5 seconds]: Type the length of time before and after the escape string is issued to the modem.

2Click Save to save your changes.

Network interfaces

From the Network Interfaces window, you can:

•Set up an Ethernet connection.

•Set up a PPP over serial port connection.

Configuring an Ethernet connection

To configure an Ethernet connection:

1In the navigation pane, select Network Interfaces under the ASM Control heading. The Ethernet window appears (see Figure 17, Network interfaces, on page 41).

Figure 17: Network interfaces

Avaya Remote Supervisor Adapter User Guide	41
November 2003