Avaya S8500 manual Accessing server power and restart control

Using the Avaya Remote Supervisor Adapter

Performing RSA tasks

Figure 33: Server power/restart activity

Field entries within this section include:

•Power: System power on, system power off, or state unknown

•State: This field shows the state of the S8500 Media Server at the time the Web page was generated. Possible states include:

•System power off/state unknown

•In POST

•Stopped in POST (error detected)

•Booted flash or system partition

•Booting OS or in unsupported OS

•In OS

•CPUs held in reset

•System power on/before POST

NOTE:

The restart counter is set to 0 (zero) if the RSA is defaulted to factory settings.

•Restart Count: This field shows the number of times the S8500 Media Server has been restarted.

•Power-on Hours: This field shows the number of hours the S8500 Media Server has been powered on.

Accessing server power and restart control

You can power-on, power-off, and restart the S8500 Media Server using the Server Power / Restart Control option on the RSA Web interface.

To access the Server Power / Restart Control option:

1In the navigation pane, select Power/Restart under the Tasks heading. The Server Power/Restart Control window appears (see Figure 34, Server power/restart control, on page 63).

62	Avaya Remote Supervisor Adapter User Guide
	November 2003