TUNER OPERATION
1.Set TAPE/TUNER/CD to TUNER.
The system automatically tunes to the station that was playing when the system was turned off or when it was last set to TUNER.
2.Set AM/FM to the desired band. The selected band and the last selected station in that band ap- pear.
show location of AM/FM button
Notes:
•The system uses a
You can also use automatic tuning (see “Automatic Tuning” on Page 12) or memory tuning (see “Memory Tuning” on Page 12).
Notes:
•Set FM STEREO/FM MONO to
FM STEREO to select stereo. The FM STEREO indicator lights when you receive an FM broadcast in stereo.
•To improve reception for weak FM stereo stations, set FM STE- REO/FM MONO to FM MONO
(monaural). The sound is no longer in stereo, but reception should improve.
show location of
FM STEREO/FM MONO switch
•For the best FM reception, fully extend the FM antenna.
3.Press TUNING + or – to tune up or down the selected band. The fre- quency changes on the display.
4.Adjust the volume and set
show location of TUNING buttons
11