CASSETTE DECK OPERATION
The system has two cassette decks. You can use both for normal playback and consecutive play, and you can also use Deck 1 for dubbing (record- ing).
Both Deck 1 (1 RECORD/PLAY- BACK) and Deck 2 (PLAYBACK 2) have a
LOADING A CASSETTE TAPE
Follow these steps to load a cassette tape in either Deck 1 or Deck 2.
Note: Use the control buttons under the same deck where you loaded the tape.
1.Take up any slack in the tape by turning the cassette’s hub with a pencil. If you do not remove ex- cess slack, the tape might be- come tangled in the record/ playback mechanism. Avoid touching the tape.
2.Press STOP/EJECT 
to open the cassette compartment door.
show STOP/EJECT location
3.Put the cassette tape into the tape guides in the compartment door, with its exposed tape edge facing down, the side you want play fac- ing you, and its full reel to the left.
4.Gently close the compartment door.
PLAYING A CASSETTE TAPE
After loading a cassette tape, follow these steps to play it.
1.Set TAPE/TUNER/CD to TAPE.
2.Press PLAY 
. The tape plays un- til it reaches the end of the side, then it automatically stops.
show PLAY location
show pencil in cassette hub
20