Avaya Remote Access Module 4 manual Attaching the Mounting Brackets

Page 7

3.Attaching the Mounting Brackets

1.Looking at the base of the IND-RAM4 unit, there are four fixing screws (beneath the four stick-on pads).

Note: Do not remove all of these screws at the same time.

2.Remove two of the pads on one side only, undo and remove the fixing screws. Use two of the longer supplied screws to attach one of the mounting brackets (such that the slotted central wall fixing holes are seen from outside the unit); see the illustration on page 5.

3.Repeat step 2 for the other side of the unit for the remaining mounting bracket.

User's Guide	Page 7
38DHB0002UKDS – Issue 2 (09/01/2002)	Remote Access Module 4

Image 7

Contents Remote Access Module Contents Overview Previous Remote Access Module KitsYou must SecurityRack Systems Location RequirementsOptional Remote Access Module 4 KitEquipment Supplied & Required Tools & part RequiredAttaching the Mounting Brackets Mounting the Remote Access Module IVM Server Cassette Installation Installing for Use With INDeX IVM/CCMUsing IND-RAM4 with IVM and CCM IVM/CCM Client InstallationTo locally restore the Remote Access Module settings Restoring INDeX Remote Access Module DefaultsRemote Access Module 38DHB0002UKDS Issue 2 09/01/2002