Zoom MRS-4 manual Reference Mixing, Playing back the same passage repeatedly A- B Repeat

Page 19

Playing back the same passage repeatedly (A- B Repeat)

4.To stop repeat playback, press the STOP [P] key.

Even after pressing the STOP [P] key to stop playback, you can perform repeat

Reference [Mixing]

This section describes advanced mixing techniques using the input mixer and track mixer.

Reference [Locating a Point]

A-B Repeat is a function that repeatedly plays back a desired region of the song. This is useful when you want to listen to the same region repeatedly.

1.Move to the point at which you want to begin repeat playback, and

press the [A-B REPEAT] key.

The [A-B REPEAT] key flashes, and the repeat start location (point A) is specified.

2.Move to the point at which you want to end repeat playback, and

press the [A-B REPEAT] key.

The [A-B REPEAT] key will change from flashing to constantly lit, and the repeat end location (point B) will be specified.

HINT

•If you specify a point B that is located earlier than point A, the region from points B ➝ A will be played repeatedly.

•If you want to redo the point A/B settings, press the [A-B REPEAT] key several times to make it go out, and then repeat steps 1 – 2.

•Point A/B setting can be done when the recorder is either stopped or playing.

3.To begin repeat playback, press the PLAY [R] key.

Repeat playback will begin when you press the PLAY [R] key while the [A-B REPEAT] key is lit. When the end point (normally point

B)is reached, the recorder jumps to the start point (normally point A), and playback continues.

AB

Playback

playback again as many times as desired, as long as the [A-B REPEAT] key is lit.

5.To turn off repeat playback, press the [A-B REPEAT] key.

The [A-B REPEAT] key goes out, and repeat playback will be turned off.

HINT

You can use repeat playback together with the auto punch-in/out function. By setting points A and B outside the punch-in/out points, you can automatically have the recorder return to point A after punch-out and play back the recorded section for checking.

Assigning two inputs to a track

In the "Basic Operation" section, we learned how to record the signal from one input on one track. By using the input mixer, it is also possible to combine the signal from two inputs onto one track, or to record it on two tracks separately. The procedure is described below.

1.Connect the instrument or microphone to be recorded to the

[INPUT 1]/[INPUT 2] jacks.

2.Set [ON/OFF] keys 1/2 to ON.

3.While listening to the sound, operate the [INPUT LEVEL]

controls 1/2 to adjust the input sensitivity.

The input level for each input can be checked separately on the display.

4.Repeatedly press the status key for the track on which you want to

record, until the key is lit in red. The track is now in the recording standby condition.

The maximum number of tracks you can record to simultaneously is two. Only the combination of tracks 1/2 or tracks 3/4 is allowed.

The signal flow from the input mixer to the tracks depends on the track selection and the status of the [ON/OFF] keys 1/2, as shown in the illustrations.

●When only one recording track is selected

INPUT 1 or INPUT 2

Recorder

Track

INPUT 1

Recorder

Track

INPUT 2

●When two recording tracks are selected (tracks 1/2 or tracks 3/4)

INPUT 1 or INPUT 2

Recorder

Track

Track

INPUT 1

Recorder

Track

Track

INPUT 2

Reference [Mixing]

36

ZOOM MRS-4

ZOOM MRS-4

37

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Versatile effects Flexible track parameter settingsOther sophisticated features Simultaneous 4-track playback/2-track recordingContents Usage and Safety PrecautionsIntroduction Internal configurationSmartMedia Parts of the MRS-4 Parts of the MRS-4Top panel Rear panel Front panelConnections Power on/off switchingTurning power on Turning power offBasic Operation Basic OperationCreating a new song Newsong YES noInsert effect algorithms Adjusting input sensitivityUsing the insert effect LimitLimit Comp Selecting and recording to a trackSelecting a track and recording on it Adjusting input sensitivity and setting the insert effectFADE100 Adjusting volume/pan/EQTrack parameters and settings Preparations for mixdownHieq on HIG Using the send/return effectHall Doble Time Send/return effect algorithms and parametersHall Room Room DobleSend on Using the mixdown effectPower Time DobleBoost Vocal Power BoostRecording on the master recorder Mixdown effect algorithmsReference Recorder Using V-takesCombining multiple tracks Bounce function Using auto punch-in/out Using manual punch-in/outRe-recording only a specified region Punch- in/out function Reference Locating a Point Switching between time and measure indicationMoving to a desired point in a song Locate function Clearing a mark Marking a point in a song marker functionAssigning a mark Moving to a mark locationReference Mixing Reference MixingPlaying back the same passage repeatedly A- B Repeat Assigning two inputs to a trackSTL Adding the input signal to the mixdownInput setting parameters and setting range Linking two tracks stereo link functionCopying the data of an entire track Reference Track EditingCopying a specified region of data to another location TR ERS Erasing a specified segmentErasing an entire track CopyYou can exchange the recorded data of two specified tracks Exchanging the data of entire tracksChange CH T1-1Reading in an existing song Reference Song FunctionsSong menu basic functions Song menu itemsSelecting the recording grade Song Grade Copying a song Song CopyDeleting a song Protecting a songFunctions available with Midi Basic metronome settingsReference Metronome/MIDI Synchronizing an external device to the MRS-4Tuner Using the tunerReference Other Functions Formatting a SmartMedia cardCont Display adjustmentsUsing the AUX in jacks to save tracks Display items and setting rangeMRS-4 Card Manager Software SpecificationsMRS-4 file configuration SpecificationsTroubleshooting Midi implementation Midi implementation chartIndex Zoom Corporation

MRS-4 specifications

The Zoom MRS-4 is a versatile, portable digital recorder designed to meet the diverse needs of musicians, podcasters, and sound engineers. Launched as part of Zoom's professional recording equipment lineup, the MRS-4 stands out for its impressive combination of features, ease of use, and sound quality.

At its core, the MRS-4 operates with a four-track recording system, allowing artists to layer sounds and create intricate compositions. This capability is particularly beneficial for musicians seeking to record multiple instruments or vocal tracks simultaneously. The device supports a variety of audio formats, enabling users to select between high-quality WAV files or more compressed formats as needed. With a dynamic range of 96 dB, the MRS-4 captures audio with clear detail, making it suitable for both professional and home studio setups.

One of the defining characteristics of the Zoom MRS-4 is its intuitive interface. The device features a backlit LCD screen and straightforward navigation buttons, allowing users to quickly access settings, select tracks, and adjust parameters without getting bogged down in complex menus. This user-friendly design makes the MRS-4 a favorite among both experienced producers and newcomers to digital recording.

The MRS-4 is equipped with a built-in stereo microphone, which can be used for ambient recording or to capture live performances with remarkable clarity. Additionally, it includes XLR inputs that facilitate the connection of external microphones, ensuring flexibility in sound capture. The recorder also boasts various effects such as reverb, chorus, and compression, allowing users to enhance their recordings directly during the tracking process.

Another impressive feature of the MRS-4 is its storage capacity. The device supports SD cards for expanded memory, making it easy to store hours of high-quality recordings. Powering the device is another advantage; the MRS-4 can be operated with standard AA batteries or via an AC adapter, ensuring it’s ready for use wherever creativity strikes.

In summary, the Zoom MRS-4 is an exceptional digital recorder distinguished by its four-track capabilities, high-quality audio formats, and user-friendly design. With features designed for flexibility and ease of use, it serves as an excellent tool for musicians, podcasters, and sound engineers alike, making it a worthy investment for anyone looking to elevate their recording experience.
Top Page Image Contents