Zoom MRS-4 Adjusting input sensitivity, Using the insert effect, Limit, Insert effect algorithms

Page 7

Basic Operation

Step 2 Recording the first track

This section describes how to record an electric guitar connected to the [INPUT 1] jack on track 1 to create the first track of a recording.

2-1

 

Adjusting input sensitivity

 

 

 

Connect the instrument to the input of the MRS-4 and adjust input sensitivity.

1.Connect the instrument to the [INPUT 1] jack on the MRS-4 (➜ p. 8).

2.Press the [ON/OFF] key 1 so that the key lights up.

The [ON/OFF] keys 1/2 serve to activate their respective inputs. When the key is lit, the input is active.

HINT

To record from an instrument with stereo output such as a synthesizer, connect the L/R output of the device to the [INPUT 1]/[INPUT 2] jacks and set both [ON/OFF] keys 1/2 to ON.

NOTE

The MRS-4 can accept up to two simultaneous input signals.

3.While playing the instrument, use the [INPUT LEVEL] control 1 to adjust the input sensitivity.

The signal input level appears on the level meter (IN) in the left part of the display. Adjust the control so that the 0 dB indicator does not light when you play the instrument at the loudest level.

0

2-2

 

Using the insert effect

 

 

 

The insert effect processes the signal from input 1/2 before it is sent to the tracks for recording. In this example, you apply the insert effect on the guitar signal supplied to the INPUT 1 jack. If you do not wish to use the insert effect, proceed to section 2-3 on page 15.

1.Press the [MIXDOWN] key and the [SEND/RETURN] key simultaneously.

The [MIXDOWN] key and [SEND/RETURN] key serve to select the effect to be used. Pressing both keys simultaneously causes the keys to flash in red. This indicates that the insert effect has been activated.

NOTE

While the [MIXDOWN] key and [SEND/RETURN] key are both flashing simultaneously, the mixdown effect and send/return effect cannot be used.

The display shows the currently selected algorithm (effect type).

LIMIT 0

The following algorithms are available for the insert effect.

2.Use the [PARAMETER/VALUE] keys to select the algorithm and the setting value.

Insert effect algorithms

Algorithm 1

( LIMIT 0 – LIMIT 9 )

LIMIT

0

 

This effect suppresses signal peaks to keep the input signal below a certain

 

 

 

 

level. During stereo recording, the effect monitors both inputs. Higher setting

 

 

 

 

 

 

 

 

LIMIT

9

 

values produce stronger limiter action.

 

 

 

 

 

Algorithm 2

( COMP 0 – COMP 9 )

COMP

0

 

This effect compresses the signal when the input signal exceeds a certain

 

 

 

 

level. During stereo recording, the effect monitors both inputs. Higher setting

 

 

 

 

 

 

 

 

COMP

9

 

values produce stronger compressor action.

 

 

 

 

Algorithm 3

( CAB CO, CAB BC, CAB ST )

 

 

 

 

 

Basic Operation

INPUT 1 level INPUT 2 level

CAB CO

CAB BC

CAB ST

This is a cabinet simulator that duplicates the sound of a guitar amplifier. It is useful when a distortion effect is connected between the guitar and the input of the MRS-4. The abbreviation on the right indicates the amp type.

CO Combo amp

BC Bright combo amp

ST Stack amp

12

ZOOM MRS-4

ZOOM MRS-4

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Versatile effects Flexible track parameter settingsOther sophisticated features Simultaneous 4-track playback/2-track recordingContents Usage and Safety PrecautionsIntroduction Internal configurationSmartMedia Parts of the MRS-4 Parts of the MRS-4Top panel Rear panel Front panelConnections Power on/off switchingTurning power on Turning power offBasic Operation Basic OperationCreating a new song Newsong YES noInsert effect algorithms Adjusting input sensitivityUsing the insert effect LimitLimit Comp Selecting and recording to a trackSelecting a track and recording on it Adjusting input sensitivity and setting the insert effectFADE100 Adjusting volume/pan/EQTrack parameters and settings Preparations for mixdownHieq on HIG Using the send/return effectHall Doble Time Send/return effect algorithms and parametersHall Room Room DobleSend on Using the mixdown effectPower Time DobleBoost Vocal Power BoostRecording on the master recorder Mixdown effect algorithmsReference Recorder Using V-takesCombining multiple tracks Bounce function Using auto punch-in/out Using manual punch-in/outRe-recording only a specified region Punch- in/out function Reference Locating a Point Switching between time and measure indicationMoving to a desired point in a song Locate function Clearing a mark Marking a point in a song marker functionAssigning a mark Moving to a mark locationReference Mixing Reference MixingPlaying back the same passage repeatedly A- B Repeat Assigning two inputs to a trackSTL Adding the input signal to the mixdownInput setting parameters and setting range Linking two tracks stereo link functionCopying the data of an entire track Reference Track EditingCopying a specified region of data to another location TR ERS Erasing a specified segmentErasing an entire track CopyYou can exchange the recorded data of two specified tracks Exchanging the data of entire tracksChange CH T1-1Reading in an existing song Reference Song FunctionsSong menu basic functions Song menu itemsSelecting the recording grade Song Grade Copying a song Song CopyDeleting a song Protecting a songFunctions available with Midi Basic metronome settingsReference Metronome/MIDI Synchronizing an external device to the MRS-4Tuner Using the tunerReference Other Functions Formatting a SmartMedia cardCont Display adjustmentsUsing the AUX in jacks to save tracks Display items and setting rangeMRS-4 Card Manager Software SpecificationsMRS-4 file configuration SpecificationsTroubleshooting Midi implementation Midi implementation chartIndex Zoom Corporation

MRS-4 specifications

The Zoom MRS-4 is a versatile, portable digital recorder designed to meet the diverse needs of musicians, podcasters, and sound engineers. Launched as part of Zoom's professional recording equipment lineup, the MRS-4 stands out for its impressive combination of features, ease of use, and sound quality.

At its core, the MRS-4 operates with a four-track recording system, allowing artists to layer sounds and create intricate compositions. This capability is particularly beneficial for musicians seeking to record multiple instruments or vocal tracks simultaneously. The device supports a variety of audio formats, enabling users to select between high-quality WAV files or more compressed formats as needed. With a dynamic range of 96 dB, the MRS-4 captures audio with clear detail, making it suitable for both professional and home studio setups.

One of the defining characteristics of the Zoom MRS-4 is its intuitive interface. The device features a backlit LCD screen and straightforward navigation buttons, allowing users to quickly access settings, select tracks, and adjust parameters without getting bogged down in complex menus. This user-friendly design makes the MRS-4 a favorite among both experienced producers and newcomers to digital recording.

The MRS-4 is equipped with a built-in stereo microphone, which can be used for ambient recording or to capture live performances with remarkable clarity. Additionally, it includes XLR inputs that facilitate the connection of external microphones, ensuring flexibility in sound capture. The recorder also boasts various effects such as reverb, chorus, and compression, allowing users to enhance their recordings directly during the tracking process.

Another impressive feature of the MRS-4 is its storage capacity. The device supports SD cards for expanded memory, making it easy to store hours of high-quality recordings. Powering the device is another advantage; the MRS-4 can be operated with standard AA batteries or via an AC adapter, ensuring it’s ready for use wherever creativity strikes.

In summary, the Zoom MRS-4 is an exceptional digital recorder distinguished by its four-track capabilities, high-quality audio formats, and user-friendly design. With features designed for flexibility and ease of use, it serves as an excellent tool for musicians, podcasters, and sound engineers alike, making it a worthy investment for anyone looking to elevate their recording experience.
Top Page Image Contents