Zoom IG-4150 manual Checking the IP Address

3 Before you click Finish in the Overview Of Your Settings screen, you can double-check all the IG settings. Use the Back button on the bottom of the screen to return to the previous screens.

4 Click Exit in the Ready! screen:

You have configured your IG to serve as a transparent wireless bridge in a LAN infrastructure environment. Proceed below to Checking the IP Address.

Checking the IP Address

Note: A computer on your network cannot communicate with any devices on that or another network or access the Internet if it has not been assigned an IP address. In the modes described in this manual (with the exception of LAN Infrastructure), a computer Client should receive an IP address from the IG. Therefore, you may want to make sure that your Client(s) is receiving an IP address through your IG.

To verify that a computer is receiving an IP address through the IG, do the following:

1 Click Start Run.

2 In the Run dialog box, enter winipcfg. The IP Configuration dialog box opens.

3 Under Ethernet Adapter Information, select the correct adapter (for example, ZoomAir). The default IP address assigned to the wireless client through the IG is 10.0.1.x.

Chapter 4 Configuring Typical Settings 29