6
IP Configuration
oExpand the “system tree” and select IP configuration. o Enter the IP Address, Subnet Mask, and Gateway
provided by your Network Administrator. o Save the changes.
o Disconnect the stand alone PC from the switch and connect the switch to the network.
o Inform the Network Administrator that the IP Address has been changed.
o NOTE: The User Manual contains instructions for configuring the IP Address from a DHCP Server and to allow the switch to act as a DHCP Server.
EIR510
7 | User Name and Password |
|
|
oThis step should be performed by the Network Administrator.
oLog onto the switch from a PC connected to the network.
oExpand the “System Tree” and select user authentication..
oEnter the new User Name and Password. Record this information in the space provided below. File this
document for future reference.
oClick the Apply button.
USER NAME: ______________________________________
PASSWORD:_______________________________________
MAC ADDRESS: ____________________________________
IP ADDRESS: _______________________________________
Basic Configuration is complete. A comprehensive Manual is contained on the CD ROM. Refer to this manual to configure the advanced features of this switch.
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445