B&B Electronics 2IQEC2 Software Installation, Installing the Card, Card Settings, Address

Page 5

Chapter 2: Installation

Software Installation

The 2IQEC2/4 comes with a useful example program. This example program may be used royalty free when used with the B&B Electronics 2IQEC2/4. Any other use is strictly prohibited. To install this example file on your hard drive:

1.Place the disk in drive A:

2.Type A: and press the <ENTER> key.

3.Type Install and press the <ENTER> key.

4.Follow the instructions given by the program.

Installing the Card

1.Turn the power to your computer off.

2.Remove the cover of the computer. Be sure to use proper grounding techniques.

3.Pick any full length (16-bit) unused slot. Although the 2IQEC2/4 cards will work in a short (8-bit) slot, IRQ's 10-15 will not be available.

4.Remove the expansion slot cover. Save the screw for installation of the 2IQEC2/4 card.

5.Set the address, IRQ, and other jumper settings. See Card Settings in the next section for instructions on setting the address and IRQ.

6.Install the 2IQEC2/4 card into the unused slot. Be certain that the card is inserted completely into the slot.

7.Secure the card with the mounting screw.

Card Settings

Address

Switch S1 configures the address of the card. Switches represent a 0 in the ON position, 1 when OFF. The address lines are labeled on the card. SA10 is the MSB and SA4 is the LSB. Table 1 shows the numerical weight and electrical connection of each switch position.

2IQEC2/43798 Manual

3

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 433-5105

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Internet Models 2IQEC2 2IQEC4Designed and Manufactured Ottawa, Illinois Table of Contents Packing List Address Switch SetupIntroduction Specifications Software Installation InstallationInstalling the Card Card SettingsWeight Hex Weight Address Switches 1st Digit 2nd Digit Position BusConnection Decimal 3A0 1110100000 0111010 Bisync comAT machines XT machines Hardware InterruptsConfiguring the jumpers Location of Jumpers 2IQEC2/43798 Manual Flag Register Read Data Address Software RegistersFlag Byte Defined RLD Byte DefinedFilter Clock Prescalers Counter Mode Registers Write to Control AddressCMR Byte Defined Definitions of count modesIOR Byte Defined Input/Output Control Register Write to Control AddressIDR Byte Defined Index Control Registers Write to Control AddressTroubleshooting Map of XT Class Machines Appendix a Hardware I/O MapHardware I/O Map of AT Class Machines Addresses Appendix B Specifications/Timing DiagramsPin Description Non-Quadrature Mode Transient CharacteristicsQuadrature Mode Page Page Page Appendix C Typical Set-up Examples

2IQEC2, 2IQEC4 specifications

B&B Electronics has long been a key player in the field of industrial communication and networking solutions, and their 2IQEC4 and 2IQEC2 devices stand as reflective examples of their innovation and dedication to quality. These devices are part of the company's extensive range designed to facilitate communication in diverse industrial settings, ensuring reliability and efficiency.

The 2IQEC4 is a robust 4-port Ethernet switch, while the 2IQEC2 serves as a 2-port variant. Both models are integrated with advanced technologies to deliver seamless connectivity in environments where durability and performance are critical. One of the standout features of these devices is their compatibility with Power over Ethernet (PoE), which allows for simpler installations by eliminating the need for separate power sources for each connected device.

These Ethernet switches are engineered for industrial applications, meaning they can withstand harsh conditions, including extreme temperatures, vibration, and electromagnetic interference. Their rugged design ensures reliable operation in demanding environments, making them ideal for industries such as manufacturing, transportation, and utility management.

Both the 2IQEC4 and 2IQEC2 come equipped with advanced security features including VLAN support and IGMP snooping, which help to optimize traffic performance and enhance overall network security. These functionalities are crucial in preventing unauthorized access, managing bandwidth efficiently, and minimizing potential network congestion.

In terms of installation and management, B&B Electronics has designed these devices for user-friendliness. The web-based management interface allows for straightforward configuration and monitoring, empowering users to manage their networks with ease. Additionally, diagnostic LEDs provide real-time feedback on device status, facilitating quick troubleshooting and maintenance.

The Ethernet switches also support a wide range of networking protocols, which ensures compatibility with various industrial devices and systems. This flexibility makes them suitable for integrating with existing infrastructure while also enabling future scalability as a network grows or evolves.

In summary, B&B Electronics' 2IQEC4 and 2IQEC2 models offer a reliable, efficient, and secure solution for industrial networking. With their robust construction, advanced features, and user-friendly management capabilities, these Ethernet switches are well-equipped to meet the challenges of modern industrial environments, making them invaluable assets in enhancing communication and operational efficiency.
Top Page Image Contents