B&B Electronics 2IQEC2, 2IQEC4 manual Hardware Interrupts, AT machines XT machines

Page 7

IRQ

The 2IQEC2/4 card allows the use of interrupts (IRQ) 2-7, 10-12, 14, and 15. This interrupt is shared with all the channels. To determine the channel that caused the interrupt, the interrupt service routine must read the address located at the base address plus 8. The lower nibble will indicate which channel caused the interrupt. Where bit 0 is the X-Axis, bit 1 is the Y-Axis, bit 2 is the Z- Axis, and bit 3 is the W-Axis. The upper nibble is not used. To clear the interrupt, the interrupt service routine must read or write to the address located at base address plus 12 (0xC). The IRQ is set by placing a jumper on JP1. Only one jumper should be placed on JP1 at any one time. Check Table 3 for common interrupt uses.

Table 3. Hardware Interrupts

IRQ

AT machines

XT machines

2

routed to IRQ controller 2

Reserved

3

serial port COM2,4

Serial port COM2,4

4

serial port COM1,3

Serial port COM1,3

5

LPT2

hard disk

6

floppy disk

Floppy disk

7

LPT1

parallel printer port 1 (LPT1)

8

real-time clock

not available

9

re-directed to IRQ2

not available

10

Unassigned

not available

11

Unassigned

not available

12

Unassigned

not available

13

Coprocessor

not available

14

hard disk

not available

15

Unassigned

not available

The conditions required to generate an interrupt can be selected by the use of jumpers. Each axis is independently configured. Note that more than one condition can be configured to generate the interrupt. Note that the use of an interrupt is not required.

2IQEC2/43798 Manual

5

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 433-5105

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Designed and Manufactured Ottawa, Illinois Models 2IQEC2 2IQEC4Internet Table of Contents Introduction Address Switch SetupPacking List Specifications Card Settings InstallationSoftware Installation Installing the Card3A0 1110100000 0111010 Bisync com Address Switches 1st Digit 2nd Digit Position BusWeight Hex Weight Connection DecimalAT machines XT machines Hardware InterruptsConfiguring the jumpers Location of Jumpers 2IQEC2/43798 Manual RLD Byte Defined Software RegistersFlag Register Read Data Address Flag Byte DefinedDefinitions of count modes Counter Mode Registers Write to Control AddressFilter Clock Prescalers CMR Byte DefinedIOR Byte Defined Input/Output Control Register Write to Control AddressIDR Byte Defined Index Control Registers Write to Control AddressTroubleshooting Map of XT Class Machines Appendix a Hardware I/O MapHardware I/O Map of AT Class Machines Pin Description Appendix B Specifications/Timing DiagramsAddresses Quadrature Mode Transient CharacteristicsNon-Quadrature Mode Page Page Page Appendix C Typical Set-up Examples

2IQEC2, 2IQEC4 specifications

B&B Electronics has long been a key player in the field of industrial communication and networking solutions, and their 2IQEC4 and 2IQEC2 devices stand as reflective examples of their innovation and dedication to quality. These devices are part of the company's extensive range designed to facilitate communication in diverse industrial settings, ensuring reliability and efficiency.

The 2IQEC4 is a robust 4-port Ethernet switch, while the 2IQEC2 serves as a 2-port variant. Both models are integrated with advanced technologies to deliver seamless connectivity in environments where durability and performance are critical. One of the standout features of these devices is their compatibility with Power over Ethernet (PoE), which allows for simpler installations by eliminating the need for separate power sources for each connected device.

These Ethernet switches are engineered for industrial applications, meaning they can withstand harsh conditions, including extreme temperatures, vibration, and electromagnetic interference. Their rugged design ensures reliable operation in demanding environments, making them ideal for industries such as manufacturing, transportation, and utility management.

Both the 2IQEC4 and 2IQEC2 come equipped with advanced security features including VLAN support and IGMP snooping, which help to optimize traffic performance and enhance overall network security. These functionalities are crucial in preventing unauthorized access, managing bandwidth efficiently, and minimizing potential network congestion.

In terms of installation and management, B&B Electronics has designed these devices for user-friendliness. The web-based management interface allows for straightforward configuration and monitoring, empowering users to manage their networks with ease. Additionally, diagnostic LEDs provide real-time feedback on device status, facilitating quick troubleshooting and maintenance.

The Ethernet switches also support a wide range of networking protocols, which ensures compatibility with various industrial devices and systems. This flexibility makes them suitable for integrating with existing infrastructure while also enabling future scalability as a network grows or evolves.

In summary, B&B Electronics' 2IQEC4 and 2IQEC2 models offer a reliable, efficient, and secure solution for industrial networking. With their robust construction, advanced features, and user-friendly management capabilities, these Ethernet switches are well-equipped to meet the challenges of modern industrial environments, making them invaluable assets in enhancing communication and operational efficiency.
Top Page Image Contents