Setup Software, Introduction, Connection

Chapter 3: SETUP SOFTWARE

Introduction

The 232BRC comes with simple setup software for configuring the A and B ports. The software can run on any PC compatible computer using Microsoft Windows 95, 98, NT, or 2000 operating system.

Once the ports are configured, all parameters are saved in non- volatile memory so the 232BRC can be powered down and used anywhere without the loss of configuration data. Configurations can also be saved to a file for setting up more than one 232BRC to the same configuration.

Connection

A serial (COM) port of the computer should be connected to Port A of the 232BRC. If the computer’s serial port is a 9 pin D-sub, a straight through connection cable is required. If the computer’s serial port is a 25 pin D-sub, the cable should be an XT to AT adapter cable such as B&B’s model 232CAMR, or a cable that would normally be used with a modem. See Appendix A for a complete set of connection tables to the 232BRC ports.

Remove the screws (4) on the bottom of the 232BRC with a Phillips screwdriver. Remove the top cover. Install the setup jumper marked JP1. See Figure 3.1 diagram of the PCBD. Power up the 232BRC with the setup jumper installed to put the unit in setup mode. NOTE: The setup software cannot recognize the connected unit if the setup jumper is not installed or if the jumper is installed after the 232BRC is powered up.

Software Installation

The setup software for the 232BRC must be installed on your hard drive before it can be run. All directions assume the 3.5” floppy drive is assigned to drive A. If your drive is assigned another drive name, replace that name for A in the instructions. To install on your hard drive follow these steps:

•Place the 232BRC setup disk #1 in floppy drive A.

•Select RUN from the Windows START menu.

•Type A:\SETUP and click OKAY.

•Follow the instructions in the Installation program.

Software Uninstall

To remove the 232BRC setup software, follow these steps:

•Select SETTINGS, CONTROL PANEL from the Windows START menu.

•Double Click ADD/REMOVE PROGRAMS

•Select 232BRC SETUP from the list of installed programs.

•Click the ADD/REMOVE button to remove the software components.

Figure 3.1 Setup Jumper Location

232BRC-3903 Manual

2232BRC-3903Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445	B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445

232BRC specifications

B&B Electronics is renowned for its high-quality industrial communication solutions, and one of its standout products is the B&B Electronics 232BRC. This device plays a crucial role in serial data communication, especially in environments where robust and reliable connections are essential.

The B&B Electronics 232BRC is a serial-to-serial converter that facilitates the connection and communication between devices that utilize different serial protocols. It serves as a bridge for devices that may not otherwise be compatible, enabling seamless data exchange in various applications, from industrial automation to telemetry systems.

One of the main features of the 232BRC is its ability to support both RS-232 and RS-422/485 protocols, making it versatile for use in multiple scenarios. The device is capable of automatic baud rate detection, which simplifies the setup process and ensures that users can quickly establish a connection without the need for extensive configuration. This feature is particularly beneficial in dynamic environments where devices may frequently be added or removed.

In addition to multi-protocol support, the 232BRC is engineered with built-in signal regeneration. This capability enhances data integrity by restoring signals that may have degraded during transmission, ensuring that the data received remains accurate and reliable. This feature makes it an ideal choice for long-distance communication, where signal attenuation can be a significant concern.

The device is also designed for ruggedness, featuring an industrial-grade housing that protects it from dust, moisture, and temperature variations that are common in factory settings. This durability ensures a long service life, reducing maintenance and replacement costs for organizations.

Moreover, the 232BRC offers extensive power options, including the ability to draw power directly from the data lines, which can simplify installation in environments where power sources are limited.

Advanced LED indicators provide users with real-time feedback on the status of the device, assisting in troubleshooting and ensuring smooth operations.

In summary, the B&B Electronics 232BRC is a highly efficient and reliable solution for serial communication challenges. Its support for multiple protocols, signal regeneration, rugged design, and user-friendly features make it an indispensable tool for industries that depend on consistent and accurate data transmission. Whether used in manufacturing, transportation, or remote monitoring, the 232BRC stands out as a preferred choice for professionals seeking dependable communications solutions.