Setup Tutorial, Main Screen | B&B Electronics 232BRC guide

Setup Tutorial

Step 1: Start the software by double clicking the 232BRC Setup icon on the desktop.

Step 2: Select the serial (COM) port that will be used to configure the 232BRC.

Step 3: Connect the 232BRC Port A to the PC COM port selected. Install the setup jumper, and power up the 232BRC. When Next is clicked, the software reads the current configuration of the connected unit and displays the Main Screen.

Main Screen

All configuration of the 232BRC is done from the Main Screen. Each port’s parameters can be individually selected and modified. Parameters can be selected from the drop-down lists. Any baud rate that is not in the list can be entered into the window.

232BRC-3903 Manual

File Menu:

From the file menu, a configuration can be saved to disk, loaded from a disk, or printed. This provides an easy method of configuring multiple units with the same setup.

Read 232BRC Configuration Button:

This button will read the configuration from the connected 232BRC. The 232BRC is read upon entering the Main Screen, so it should not have to be read again unless it is necessary to set the parameters back after changing.

View 232BRC Settings Button:

This button will display all current port parameters of the connected unit on one screen for review. Any changes to the currently connected unit that have not been saved will be shown in Red. The page can then be printed for review or for attachment to the 232BRC.

Configure 232BRC Button:

This button will save all changes to the connected unit.

NOTE: Once changes are saved to the 232BRC they cannot be reset automatically. Be sure to review all changes before saving using the View Module Configuration button.

Run Self Test Button:

The 232BRC is programmed with a Self Test mode. The microprocessor checks the UARTs, RAM, and EEPROM and reports any errors back to the setup software. If the software reports an error, contact B&B Technical Support.

Copying Parameters Between Units

The 232BRC setup software can save configuration data to a file for copying of parameters. Any 232BRC’s configuration can be copied by first reading the data from one unit, then saving to another.

Step 1: Run the setup software.

Step 2: Select serial (COM) port to be used for programming.

Step 3: If the configuration to be used is already saved to a file, skip to Step 8.

16	2232BRC-3903Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445	B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91 792444 – Fax +353 91 792445

232BRC specifications

B&B Electronics is renowned for its high-quality industrial communication solutions, and one of its standout products is the B&B Electronics 232BRC. This device plays a crucial role in serial data communication, especially in environments where robust and reliable connections are essential.

The B&B Electronics 232BRC is a serial-to-serial converter that facilitates the connection and communication between devices that utilize different serial protocols. It serves as a bridge for devices that may not otherwise be compatible, enabling seamless data exchange in various applications, from industrial automation to telemetry systems.

One of the main features of the 232BRC is its ability to support both RS-232 and RS-422/485 protocols, making it versatile for use in multiple scenarios. The device is capable of automatic baud rate detection, which simplifies the setup process and ensures that users can quickly establish a connection without the need for extensive configuration. This feature is particularly beneficial in dynamic environments where devices may frequently be added or removed.

In addition to multi-protocol support, the 232BRC is engineered with built-in signal regeneration. This capability enhances data integrity by restoring signals that may have degraded during transmission, ensuring that the data received remains accurate and reliable. This feature makes it an ideal choice for long-distance communication, where signal attenuation can be a significant concern.

The device is also designed for ruggedness, featuring an industrial-grade housing that protects it from dust, moisture, and temperature variations that are common in factory settings. This durability ensures a long service life, reducing maintenance and replacement costs for organizations.

Moreover, the 232BRC offers extensive power options, including the ability to draw power directly from the data lines, which can simplify installation in environments where power sources are limited.

Advanced LED indicators provide users with real-time feedback on the status of the device, assisting in troubleshooting and ensuring smooth operations.

In summary, the B&B Electronics 232BRC is a highly efficient and reliable solution for serial communication challenges. Its support for multiple protocols, signal regeneration, rugged design, and user-friendly features make it an indispensable tool for industries that depend on consistent and accurate data transmission. Whether used in manufacturing, transportation, or remote monitoring, the 232BRC stands out as a preferred choice for professionals seeking dependable communications solutions.