Avocent Single port KVM over IP switch Create a New Device, KVM Vision Viewer Setup step

Single port KVM over IP switch

5-5

Figure 5-17. KVM Vision Viewer Setup step

6.2.3.2Create a New Device

¾ Start KVM Vision Viewer

¾ Click on “Device” and select “New Device” to create a new device

Figure 5-17. Create a new Device

Figure 5-17. Device Configuration dialog

Device Name: Enter a name to your device.

Network Address: Enter an IP address the IP-KVM switch uses.

Authentication Port: This is a fixed number “443”.

Username: The factory default Username is “super”

Password: The factory default Password is “pass”.

41