When the server is dead | Avocent Single port KVM over IP switch

Single port KVM over IP switch

2. Introduction

Thank you for purchasing IP-KVM switch. IP-KVM switch can save your MONEY, TIME, SPACE, EQUIPMENT and POWER. IP-KVM switch defines a new class of remote KVM access devices. IP-KVM switch combines digital remote KVM access via IP networks with comprehensive and integrated system management.

IP-KVM switch provides convenient, remote KVM access and control via LAN or Internet. It captures, digitizes, and compresses video signal and transmits it with keyboard and mouse signals to and from a remote computer. IP-KVM switch provides a non-intrusive solution for remote access and control. Remote access and control software runs on its embedded processors only but not on mission-critical servers, so that there is no interference with server operation or impact on network performance.

Furthermore, IP-KVM switch offers additional remote power management with the help of optional available device.

IP-KVM switch supports consoles consisting of PS/2 style keyboards and mouse and HDDB 15 video output. IP-KVM switch will automatically detect the current video mode of the console, however manual fine-tuning is recommended to receive the best video quality. IP-KVM switch will accept video streams up to 110 MHz dot clock. This results in a screen resolution of 1280x1024 pixels with a frame rate of 60 Hz.

2.1. When the server is up and running

IP-KVM switch gives you a full control over the remote server. The Management Console allows you to access the remote server’s graphics, keyboard and mouse and to send special commands to the server. You can also perform periodic maintenance of the server. Using the Console Redirection Service, you are able to do the following:

I.Reboot the system

II.Watch the boot process.

III.Boot the system from a separate partition to load the diagnostic environment.

IV. Run special diagnostic programs.

2.2. When the server is dead

Obviously, fixing hardware defects is not possible through a remote management device. Nevertheless IP-KVM switch gives the administrator valuable information about the type of a hardware failure. Serious hardware failures can be categorized into five different categories with different chances to happen:

I.Hard disk failure 50%

II.Power cable detached, power supply failure 28%

III.CPU, Controller, main board failure 10% IV. CPU fan failure 8%

V.RAM failure 4%

Using IP-KVM switch, administrators can determine which kind of serious hardware failure has occurred (See table 2-1).

Single port KVM over IP switch specifications

The Avocent Single Port KVM over IP switch is a powerful device designed to enhance and streamline remote server management. As the demand for efficient IT infrastructure grows, this KVM (Keyboard, Video, Mouse) switch serves as an indispensable tool for system administrators. By allowing remote access to servers, the Avocent switch ensures that users can manage their IT assets from virtually anywhere.

One of the standout features of the Avocent Single Port KVM over IP switch is its ability to provide high-resolution video output. Supporting resolutions up to 1920x1200, users can experience a clear and responsive graphical display even when accessing servers over long distances. This ensures that remote management does not compromise on quality, making it easier for administrators to execute tasks with precision.

The switch also boasts advanced security features to protect sensitive data and systems. With support for 128-bit SSL encryption, the device ensures that all communication between the user and the server remains secure. Additionally, it supports user authentication protocols, including LDAP and RADIUS, allowing organizations to maintain strict access controls.

Ease of use is another key characteristic of the Avocent Single Port KVM over IP switch. The intuitive web-based interface allows users to quickly configure the device and access connected servers without requiring extensive technical knowledge. Moreover, the switch supports multiple platforms, including Windows, Linux, and Unix, providing flexibility for diverse IT environments.

Furthermore, the Avocent switch incorporates features such as video capture, allowing administrators to record sessions for compliance and documentation purposes. This functionality is invaluable for maintaining audit trails and training materials. By making it easy to document interactions with the server, organizations can improve their operational efficiency and compliance posture.

In terms of technologies, the Avocent Single Port KVM over IP switch utilizes advanced compression techniques to optimize bandwidth usage while maintaining high-quality video performance. This allows organizations to benefit from remote management capabilities even in environments with limited network capacity.

In conclusion, the Avocent Single Port KVM over IP switch combines high-resolution video output, robust security features, ease of use, and advanced technologies. These characteristics make it an essential tool for IT professionals seeking to enhance their remote server management capabilities. Whether for maintenance, troubleshooting, or configuration, this KVM switch empowers administrators to maintain their systems effectively and securely from any location.