30A Switched Hub
Set Up Quick Reference
For all IP Telephone documentation, go to http://www.avaya.com/support and select Telephones and End User Devices.
IMPORTANT USER SAFETY INSTRUCTIONS
The most careful attention has been devoted to quality standards in the manufacture of this equipment. Safety is a major factor in the design of every set. But, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below and on the next page. These suggestions will enable you to take full advantage of this equipment. Then, retain these tips for later use.
!
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
!
WARNING:
The ethernet interface should not leave the building premises unless connected to telecommunications devices providing primary and secondary protection, as applicable.
Use
This equipment is for use only with Avaya IP Telephone Models 4612, 4624, and 4630.
When using this equipment, the following safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.
•Read and understand all instructions.
•Follow all warnings and instructions marked on this equipment.
•This equipment can be hazardous if immersed in water. To avoid the possibility of electric shock, do not use it while you are wet. If you accidentally drop the equipment into water, do not retrieve it until you have first unplugged the power supply and the line cord from the modular wall jack. Then, call service personnel to ask about a replacement.
•Avoid using this equipment during electrical storms in your immediate area. There is a risk of electric shock from lightning. Urgent calls should be brief. Even though protective measures may have been installed to limit electrical surges from entering your business, absolute protection from lightning is impossible.
Comcode: 700234750 555-236-700
Issue 2, July 2002
•Never push objects of any kind into the equipment through housing slots since they may touch hazardous voltage points or short out parts that could result in a risk of electric shock. Never spill liquid of any kind on this equipment. If liquid is spilled, however, refer servicing to proper service personnel.
•To reduce the risk of electric shock, do not disassemble this equipment. There are no user serviceable parts. Opening or removing covers may expose you to hazardous voltages. Incorrect reassembly can cause electric shock when the equipment is subsequently used.
Service
•Before cleaning, unplug this equipment from the ethernet jack and the power supply. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
•Unplug the device from the phone, wall jack, and/or PC. Be sure to refer servicing to qualified service personnel when these conditions exist:
—If liquid has been spilled into this equipment.
—If this equipment has been exposed to rain or water.
—If this equipment has been dropped or the housing has been damaged.
—If you note a distinct change in the performance of this equipment.
This equipment shall be installed and maintained by trained service personnel. All the input/output ports are classified as Safety Extra Low Voltage (SELV, in the meaning of IEC 60950). To maintain safety compliance when connecting the equipment electrically to other equipment, the interconnecting circuits shall be selected to provide continued conformance of clause 2.3 for SELV circuits (generally, double/reinforced insulation to 240Vac rms to any primary/mains circuitry and 120Vac rms to any Telecommunication network circuitry). To ensure the above conditions are adhered to, only interconnect the equipment with the already approved/certified equipment.
SAVE THESE INSTRUCTIONS
When you see this warning symbol on the product, refer to ! this instructions booklet for more information before
proceeding.
1