Briggs & Stratton 8 manual Hydraulic Specifications, To reach 100 C

Page 5

•Full DOT approved lighting package with reflective tape

•Front tongue jack, rated for 7,000 lb capacity.

TRAILER SPECIFICATIONS

• Target trailer weight 5,500 lb.

• Trailer width of 8' ft.

Axle Dual axle, rated for 12,000 lb. (5,443 kg) capacity

•Spare tire included.

•MaximumBrakes tongueElectric weight 500 lb.

Hitch Pintle ring hitch for electric brake

D. HYDRAULIC SPECIFICATIONS

Dual•Safety16 HPChainsgasolineMinimumengine10,000setlb (4,536at 3000kg) capacityRPM (16 HP diesel engine is an option).

• 8.4 cc or 0.51 cu. in. Sunstrand pump is used to generate up to 6.5 GPM fo

hydraulicLighting fluidFull. DOT approved lighting package with reflective tape

• System pressure is set at 2500 psi on the apitech valve.

Front Tongue Jack Rated for 7,000 lb. (3,175 kg) capacity

• 12 Gallon fuel tank estimated to last up to 12 hours of operation.

•TrailerHydraulicWeight oil6,500sightlb. gauge(2,948 kg)is mounted on hydraulic tank to monitor oil level.

•A 5 micron high pressure and 10 micron low filter are used to keep the Trailer DimensionhydraulicSize oil8'clean(2.44 m). Bothwide xfilters9' 6" (2.will90 m)indicatehigh x 21' 6"on(6the.55 m)ECBlong when elements

are plug.

Tongue Weight 600-650 lb. (272-295 kg)

• Apitech valve controlled (ECB controlled) hydraulic ME-24 Ross motor to

drive arms. Motor to have pulse sensor (30 pulses per rev).

• Apitech valve controlled (ECB controlled) 56 inches hydraulic cylinder to

HYDRAULIC SPECIFICATIONS

move drum. Drum to have potentiometer mounted to provide signal feedback

on drumEnginelocation16 HP @. 3170 RPM (12 kW @ 3170 RPM) Briggs & Stratton V-Twin Vanguaard *16 HP (12 kW) Diesel engine is an option

• 2500 psi, 6.5 gpm external hydraulic circuit, controlled by Apitech valve System(ECBPressurecontrolled)3,000 psi. Plumbed(207 bar) at rear of trailer with quick connects for

Condux FO Blower.

Hydraulic Flowrate

7 gpm (26 lpm)

OUT OF RANGE

• Thermostatic control valve is used on the inlet of the cooler to prevent

hydraulic fluid flowing through 7.8 HP cooler when the temperature has yet

Fuel Capacity

12 Gallon (45 liters) estimated to last up to 12 hours of operation

to reach 100 C.

 

 

Hydraulic Fluid Sight

 

 

 

Gauge With

Mounted on hydraulic tank to monitor fluid level and fluid temperature

Thermometer

 

 

 

E. ELECTRONIC CONTROL SYSTEM SPECIFICATIONS

Filtration

5 Micron high pressure and 10 micron low pressure filters used to keep hydraulic oil

Contained within acleanseparate.

set of documents:

 

• Remote Electronic Control Box Specification: K:\PRODUCT\Product Dev

2,500 psi (172 bar), 6.5 gpm (25 lpm) external hydraulic circuit.

Projects\1995\95—52 Figure 8 Trailer\Electronic Controls\Electronic

External Hydraulics

functions.lwp

Plumbed at rear of trailer with quick connects for Condux Fiber Optic Blower.

• Machine Electronic Control Box Specification: K:\PRODUCT\Product Dev

Thermostatic Control Used on inlet of the cooler to prevent hydraulic fluid flowing through 7.8 HP (5.8 kW)

Projects\1995\95Valve cooler when—52temperatureFigure 8hasTrailer\Electronicyet to reach 100 C. Controls\Machine Control

Panel.lwp

F. ELECTRICAL / ELECTRONICELECTRICAL SPECIFICATIONS/ ELECTRONIC SPECIFICATIONS

• 12 volt DC electrical system.

Electrical System 12 volt DC

•Two12 VDC battery.

•A 20BatteriesampereTwoattenuettor12 volt VDC isBatteriesused to generate enough power for the

electrical system.

 

Controls: throttle, arm disengage, strobe lights, work light, blower and controller

• Throttle, free wheel, strobe lights, work light, blower and controller switches

Control Panel

switches with fuses, also the hour meter, emergencyOUTstopOFswitch,RANGEhydraulic system

 

pressure, fuel gauge, choke and push start button.

with fuse are place on the control panel.

Plug

Offered the

• Glowplug is offer for diesel engine.

• Hour meter,Twoemergencystrobe and fourswitch,clearancehydrauliclights aresystemoffered topressure,satisfy the DOTfuelspecification.gauge chokeWork

Lights

light is offered to operate the machine in dark.

and push start button are also place on the control panel.

Isolated •12TwoVDC Powerstrobe andChargesfourthroughclearancemain system,lightsandareit isofferedisolated bytoa satisfydiode to preventthe DOTdrawing from this power supply for the work light, strobe lights, starter, blower, free wheel solenoid and

Supplyspecificationfor ECB throttle. .

Limit Switches

On all openings and tipping gates

 

 

Rear Electric Turk

To power to Fiber Optic Cable Blower

Connector

 

 

 

Storage Area

Secured, weather resistant, and shock absorbing for the remote control and 65' (20 m)

of control cable.

 

 

 

Mounts

For remote in/near control panel, also a mount on the Fiber Optic Cable Blower for the

remote.

 

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Eliminator Trailer Communications with the Manufacturer Important Safety NoticeTable of Contents Trailer Specifications Cable Handling SpecificationsTechnical Information Reposition the trailer on the job siteTo reach 100 C Hydraulic SpecificationsElectronic Control System Specifications Safe Operating Practices Work Area SafetyHydraulic Devices Electric DevicesJobsite Set-Up Guidelines HAND-HELD Wired Remote Controller Electronic Control Features and OperationSelect button + / In / Up button and / Out / Down buttonCable Diameter LED Drum Position LEDFILTERS, Gate & Emergency Stop Details Electronic Machine ControllerFunction Description Green LED RED LED OFF Disconnect Arm Lock Prepare for OperationJack Mounts Connect Electronic Machine Controller Electronic Machine Controller Panel Pull Release Cable Load CableLay Cable In Place Block Horizontally AssemblyClose and Lock Secure Cable Inside On DrumProper Cable Winding Power WindingPage Unload Cable Another location Prepare For TransportProblem Solution Service & MaintenanceTroubleshooting Guide Display Actual Setting Command/ Procedure Parameter SettingsPart Number Description Replacement PartsFactory Assistance Warranty InformationLimited Warranty Condux International, Inc

8 specifications

Briggs & Stratton is a well-known name in the world of small engines, and the Briggs & Stratton 8 is one of their flagship products that showcases the company's commitment to quality, performance, and innovation. This small engine is primarily designed for handheld equipment, making it ideal for lawn mowers, generators, and pressure washers. With its robust design and reliable operation, the Briggs & Stratton 8 has garnered a reputation for being efficient and durable.

One of the main features of the Briggs & Stratton 8 is its reliable starting system. Equipped with a recoil start mechanism, this engine allows users to start their equipment with ease and efficiency, even in cold weather conditions. The well-engineered ignition system ensures a smooth start every time, reducing the frustration often associated with smaller engines.

The Briggs & Stratton 8 also boasts an innovative overhead valve (OHV) design. This technology contributes to higher efficiency and better performance, allowing for improved fuel economy and lower emissions. The OHV design helps optimize airflow within the engine, which in turn enhances power output and reduces overall engine noise. As a result, users can enjoy a quieter operation, making it ideal for residential areas.

Another important characteristic of the Briggs & Stratton 8 is its durability. Constructed with high-quality materials, this engine is built to withstand the rigors of frequent use. The crankshaft and camshaft are designed for maximum strength, and the aluminum cylinder head contributes to the engine’s longevity, reducing the wear and tear that can affect performance over time.

Additionally, the Briggs & Stratton 8 features an easy-access oil fill and dipstick, making maintenance a breeze for users. Regular oil changes are vital for optimal performance, and the design of this engine facilitates quick and hassle-free maintenance.

In terms of versatility, the Briggs & Stratton 8 can power a variety of equipment, making it a versatile choice for homeowners and professionals alike. With its combination of reliability, fuel efficiency, and ease of maintenance, the Briggs & Stratton 8 stands out as an excellent option for anyone in need of a powerful small engine. Whether it’s for seasonal yard work or regular maintenance tasks, this engine delivers performance you can trust.
Top Page Image Contents