Briggs & Stratton 8 manual Technical Information, Reposition the trailer on the job site

Page 4

Technical Information

1.

4

The Condux Figure-8 Eliminator Trailer is designed to greatly reduce cable splicing and the need to manually “figure-eight” cable by allowing longer continuous runs when no cable end is available. The Trailer removes cable from a cable reel, and then dispenses it.

This unit is not intended for use where cable ends are available, nor is it a device for transporting cable.

Do not figure-eight any dual strength member fiber optic cable using the Condux Figure-8 Eliminator Trailer. Condux will not warranty or be held liable for any cable damage resulting from the use of dual strength member fiber optic cable on the Condux Figure-8 Eliminator Trailer.

In addition, the Condux Figure-8 Eliminator Trailer can be used as a hydraulic power source in tandem with a Condux Fiber Optic Cable Blower.

• Figure 8 Eliminator trailer used to eliminate the need to manually figure-eightfiber optic cable. GENERAL SPECIFICATIONS

Figure-8 Eliminator

• Electronic control system to control all functions of the trailer.

Used to eliminate the need to manually figure-eight fiber optic cable.

• SingleTrailerperson operation.

Electronic• DrumControland arm assembly fully enclosed (four sides) by safety cages.

Control all functions of the trailer.

System

• Cable to be loaded from ground level without having to climb into

Drum & ArmtrailerAssembly- accessFully doorsenclosedthroughon all foursafetysides bycagessafety cages. .

• Storage for remote controller and its harness.

Loaded from ground level without having to climb into trailer - access doors through

Loading Cable

• Freewheel modesafety cageswith. variable drag - adjustable through electronic controls.

FreewheelUsedMode whenwith Adjustablecable isthroughbeingelectronicpulled offcontrols,the drumused whenby cablethe FOis beingBlowerpulled. off the drum by Variable Drag Fiber Optic Blower.

• Arm assembly can be free wheel by switching on the solenoid.

Arm• AllAssemblycomponentsCan betofreewheelbe madeby switchingof non-corrosiveon the disengagematerialsarm switchor. be plated or painted.

Arm Placement Arms must be locked into position during transport to prevent the beam from fatiguing.

• Arms must be locked into position during transport to prevent the beam

Trailer tofrombe usedfatiguingfor Trailer. to be used for handling cable in figure-8 situation only. Not for transporting

Handling Cable cable.

• Trailer is to be used for handling cable in a figure 8 situation only. Not for

transporting cable. Occasional transport of cable may be required to

reposition the trailer on the job site.

 

CABLE HANDLING SPECIFICATIONS

B. CABLE HANDLING SPECIFICATIONS

Maximum Cable

1.05" (26.67 mm)

Diameter

 

• Maximum cable diameter of 1.05 inch.

Max. Cable Loading

• TheoreticalTension cable pulling tension of 187 lbs.

160 lb. (712 N)

• Minimum bend radius of 20 times the cable diameter through the guide roller

Minimum Bend Radius 20 times the cable diameter through guide roller (20 x 1.05= 21" (533 mm) bend radius)

blocks (20 * 1.05 = 21" bend radius).

Minimum Drum

• Minimum drum42" (1,067diametermm) 42 inches.

Diameter

• Average cable loading speed 612 ft/ min or 40 RPM.

Maximum speed is 785 ft/min (239 m/min) on a full drum, Maximum speed is 440 ft/min

Cable Loading Speed

• Roller blocks(134canm/min)be oneasilyan emptyoperateddrum with one hand.

• Cable capacity of 44000 ft of 1/2" cable, 20,000 ft of 3/4" cable, 11000 ft of

Arm Speed

40 RPM

1.05" cable.

 

Roller Block Operation

Easily operated with one hand.

C. TRAILER SPECIFICATIONS

Stabilizer Jacks

Manual outrigger jacks.

• Dual axle, rated for 12,000 lb capacity.

• Electric brake or surge brake.

 

48,000

ft of 1/2" diameter cable (15 km of 13 mm cable)

• Pintle ring hitch for electric brake and ball hitch for surge brake.

 

31,000

ft of 5/8" diameter cable (10 km of 16 mm cable)

• Dual safety chains, minimum 10,000 lb capacity

Cable Capacity

22,000

ft of 3/4" diameter cable (7 km of 19 mm cable)

 

16,000

ft of 7/8" diameter cable (5 km of 22 mm cable)

 

12,000

ft of 1" diameter cable (4 km of 25 mm cable)

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Eliminator Trailer Important Safety Notice Communications with the ManufacturerTable of Contents Cable Handling Specifications Trailer SpecificationsTechnical Information Reposition the trailer on the job siteElectronic Control System Specifications Hydraulic SpecificationsTo reach 100 C Work Area Safety Safe Operating PracticesHydraulic Devices Electric DevicesJobsite Set-Up Guidelines Electronic Control Features and Operation HAND-HELD Wired Remote Controller+ / In / Up button and / Out / Down button Select buttonCable Diameter LED Drum Position LEDElectronic Machine Controller FILTERS, Gate & Emergency Stop DetailsFunction Description Green LED RED LED OFF Prepare for Operation Disconnect Arm LockJack Mounts Connect Electronic Machine Controller Electronic Machine Controller Panel Load Cable Pull Release CableBlock Horizontally Assembly Lay Cable In PlaceClose and Lock On Drum Secure Cable InsidePower Winding Proper Cable WindingPage Unload Cable Prepare For Transport Another locationTroubleshooting Guide Service & MaintenanceProblem Solution Parameter Settings Display Actual Setting Command/ ProcedureReplacement Parts Part Number DescriptionLimited Warranty Warranty InformationFactory Assistance Condux International, Inc

8 specifications

Briggs & Stratton is a well-known name in the world of small engines, and the Briggs & Stratton 8 is one of their flagship products that showcases the company's commitment to quality, performance, and innovation. This small engine is primarily designed for handheld equipment, making it ideal for lawn mowers, generators, and pressure washers. With its robust design and reliable operation, the Briggs & Stratton 8 has garnered a reputation for being efficient and durable.

One of the main features of the Briggs & Stratton 8 is its reliable starting system. Equipped with a recoil start mechanism, this engine allows users to start their equipment with ease and efficiency, even in cold weather conditions. The well-engineered ignition system ensures a smooth start every time, reducing the frustration often associated with smaller engines.

The Briggs & Stratton 8 also boasts an innovative overhead valve (OHV) design. This technology contributes to higher efficiency and better performance, allowing for improved fuel economy and lower emissions. The OHV design helps optimize airflow within the engine, which in turn enhances power output and reduces overall engine noise. As a result, users can enjoy a quieter operation, making it ideal for residential areas.

Another important characteristic of the Briggs & Stratton 8 is its durability. Constructed with high-quality materials, this engine is built to withstand the rigors of frequent use. The crankshaft and camshaft are designed for maximum strength, and the aluminum cylinder head contributes to the engine’s longevity, reducing the wear and tear that can affect performance over time.

Additionally, the Briggs & Stratton 8 features an easy-access oil fill and dipstick, making maintenance a breeze for users. Regular oil changes are vital for optimal performance, and the design of this engine facilitates quick and hassle-free maintenance.

In terms of versatility, the Briggs & Stratton 8 can power a variety of equipment, making it a versatile choice for homeowners and professionals alike. With its combination of reliability, fuel efficiency, and ease of maintenance, the Briggs & Stratton 8 stands out as an excellent option for anyone in need of a powerful small engine. Whether it’s for seasonal yard work or regular maintenance tasks, this engine delivers performance you can trust.
Top Page Image Contents