Optimus STAV-3580 owner manual Tape/VCR Section, Tape Power

Using the Remote Control

Tape/VC Section

Tape/VCR Section

Before operation:

•Set AUDIO/VCR to AUDIO for a cassette deck or to VCR for a VCR.

•For a cassette deck, select TAPE 2 MONITOR or VCR/TAPE 1.

•For a dual cassette deck, select DECK 1 or DECK 2. If you use a single cassette deck, press DECK 2.

•You must connect the tape deck both to your receiver’s CONTROL OUT and audio jacks for these functions to work.

	Press to start normal play.
	Press to play the reverse side of an auto-reverse cassette
	deck.
	Press to cancel the current function.
and	For a cassette deck, lets you quickly locate and play the
	beginning of recorded material during play.
	When the tape is stopped, lets you rapidly search forward or
	backward to locate a specific section of the tape.
	For a VCR, lets you rapidly view a tape either forward or
	backward.
DECK 1/DECK 2	Selects Deck 1 or Deck 2 when you use a dual cassette deck
	with AUDIO/VCR set to AUDIO.
TAPE POWER	Turns on the connected VCR with AUDIO/VCR set to VCR;
	turns on the cassette deck with AUDIO/VCR set to AUDIO.
	Note: TAPE POWER does not work with all Optimus Profes-
	sional Series cassette decks.
– VCR CH +	Moves to the next higher or lower channel with AUDIO/VCR
	set to VCR.
TV/VCR	Selects between normal TV viewing and VCR input with
	AUDIO/VCR set to VCR.
TAPE SELECT	Selects cassette 1 to 6 for a multi-cassette changer.

24