Avaya ELAT manual RTP General Configuration

Page 15

ExpertNet Lite Assessment Tool - User Guide

Step 6: RTP General Configuration

On this page you have the option to change the default settings for RTP tests run on the network. All RTP tests that are added automatically will use these settings. You can manually add further RTP tests with different settings when the Wizard settings are configured.

Codec

Defines the Codec of the RTP test calls. This will alter the rate and size of

 

packets being sent between Traffic Simulators in order to emulate the G.711

 

and G.729 codecs.

 

 

Diff Serv Code Point

Defines the Differentiated Services Code Point (DSCP) of the IP Packets of RTP

 

test calls. Routers will treat packets differently depending on the DSCP value

 

set in outgoing packets. By default this value is 46 (Expedited Forwarding).

 

 

Voice Payload Size

Defines the Voice Payload size of the RTP packets of a test call (in

(ms)

milliseconds). Must be a multiple of 10.

 

 

Number of

Defines the number of RTP test calls to execute simultaneously for a single

Simultaneous Calls

test. The default value for this setting is 2. Measurements for each call can

 

only be taken in one direction. When two or more calls are configured, half of

 

them originate at the Controller and half at the test agent so data is collected

 

in both directions providing a more complete assessment of the network than

 

if a single call were run.

 

 

Test Duration

Defines the duration of each RTP test call (in seconds).

 

 

Automatically Create

Check this box to allow the Controller to automatically create new RTP test

RTP Tests

Calls from the Controller to the RTP Traffic Simulator as the simulators

 

register.

 

 

SNMP Polling

Check this box to allow the Controller to enable SNMP polling for RTP test

 

calls.

 

 

Discover Paths

Check this box to allow the Controller to use traceroute to discover the paths

 

between the Controller and the Traffic Simulators during RTP test calls.

 

 

Protocol

Select a traceroute protocol to be used to discover routers on the test path.

 

The default setting is UDP.

 

 

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents ExpertNet Lite Assessment Tool Documentation disclaimer Avaya Inc. All rights reservedAbout the ExpertNet Lite Assessment Tool About this guideExpertNet Lite Assessment Tool Architecture Requirements for Avaya Traffic Simulator Requirements for Elat ControllerInstalling ExpertNet Lite Assessment Tool Controller Files\Avaya\ELAT\configObtain the Elat License File Launch the Program Install the ControllerGeneral Settings Configuring the Elat ControllerNetwork Discovery Options Use Existing Topology Use default gatewayLocation to Start Network Discovery Discover TopologySnmp Read Community Strings Parts of Network to DiscoverExpertNet Lite Assessment Tool User Guide Per second Snmp SettingsPoll Interval of Single Number of Polls/SecAverage Number Ping SettingsDefault setting is 180 bytes Request TimeoutRTP General Configuration RTP Ports Range End RTP Ports ConfigurationCommand Port RTP Ports RangeInstall and Configure the Avaya Traffic Simulator Installing the Avaya traffic SimulatorConfiguring the Avaya Traffic Simulator About RTP Paths Add RTP TestsDiscover Path To EndpointAbout Ping Paths Add Ping TestsPath Tracerouting RTP Tests Understanding the Network Paths ViewColumns in the Network Path View Ping TestsNumber of calls Delay/Loss/JitterVerify the Tests Begin Data Collection Automatic Upload Notification Avaya Associates When assessments are completeAnalyzing the Report Overview Graphs QoS Graphs Snmp Data ExpertNet Lite Assessment Tool User Guide Troubleshooting Why do I not see a path that I was expecting to see?Why do I see 100% packet loss for a given path? Why is there no CPU utilization for one of my routers? What ports does Elat use? Where are the log files stored?Can I use network devices as endpoints of a path? What devices should I use as endpoints?How long will a dataset remain on the server? How much traffic does Elat create on a network?How much bandwidth does Elat use? How does the throttling mechanism work? Get the following error message on start upImported paths fail to run properly during a measurement run Installing the ExpertNet Lite Assessment Tool Controller Appendix a Installing the Controller and Test AgentsExpertNet Lite Assessment Tool User Guide ExpertNet Lite Assessment Tool User Guide To configure Norton Personal Firewall Appendix B Firewall ConfigurationTo configure Windows Firewall To configure McAfee Personal FirewallGo to the Administrator Center To configure PC-Cillin Internet SecurityTo configure Tiny Personal Firewall To configure ZoneAlarmDownload Report Appendix C Avaya Associates Downloading the ReportGenerate and Download Custom Reports Glossary

ELAT specifications

Avaya ELAT, or Emerging Leaders Associate Training, is a specialized program designed by Avaya, a global leader in enterprise communications. The ELAT program focuses on equipping participants with the essential skills and knowledge required to thrive in the fast-evolving landscape of communication technologies.

One of the main features of Avaya ELAT is its comprehensive curriculum, which covers a wide range of subjects, including cloud communications, unified communications, artificial intelligence in customer experience, and data analytics. This multidimensional approach ensures that participants gain a well-rounded understanding of the technologies shaping the future of enterprise communications.

Another significant characteristic of the Avaya ELAT program is its emphasis on hands-on experience. Participants engage in practical workshops and real-world scenarios that allow them to apply their learning immediately. This practical application reinforces theoretical concepts, enhancing participants' problem-solving abilities and technical proficiency in a workplace environment.

Moreover, the program leverages Avaya’s robust technological ecosystem, which includes advanced software and hardware solutions. By using industry-leading products, participants gain firsthand exposure to the tools they will encounter in their careers, fostering familiarity and decreasing the learning curve upon entering the workforce.

Collaboration is a key component of Avaya ELAT. Participants often work in teams, facilitating the development of interpersonal skills and teamwork capabilities, essential traits in today’s job market. The program actively encourages networking among peers and industry professionals, providing invaluable opportunities for mentorship and career advancement.

Lastly, Avaya ELAT focuses on nurturing leadership qualities in its participants. Through various leadership training modules, participants learn how to lead teams effectively, communicate vision, and influence change within their organizations. This focus on leadership ensures that graduates of the program are not only skilled technicians but also future leaders in technology.

In conclusion, Avaya ELAT stands out with its well-rounded curriculum, hands-on experience, emphasis on collaboration, and leadership development. By equipping emerging leaders with the essential skills and knowledge required in the realm of enterprise communications, Avaya ELAT plays a pivotal role in shaping the future leaders of the industry.
Top Page Image Contents