Buffalo Technology WLE-POE-R33, WLE-POE-R7 specifications Power Over Ethernet Receiver

Power Over Ethernet Receiver

Connecting to your Power-Over-Ethernet Receiver (WLE-POE-R33 / WLE-POE-R7)

The WLE-POE-R33/R7 Adapter is an adapter that supplies power to the AirStation via a Power Supply Adapter (such as the WLE-POE-S). Using this product enables the AirStation to be used in locations that are not provided with a nearby power supply. The WLE-POE-R33/R7 Adapter can be installed on the AirStation Wall Mounting Kit (WLE-WK / WLE-WK33), which are sold separately.

■NOTE: The WLE-POE-R33/R7 Adapter must be used with a compatible Power Supply Adapter when supplying power to the AirStation. Check the specifications on Page 4 to verify compatibility.

Package Contents:
◗	POE Receiver Adapter	1	(WLE-POE-R33 -OR- WLE-POE-R7)
◗ Attachment Bracket		1
◗	LAN Patch Cable	1
◗	5mm Screws	2	(For mounting product to bracket)
◗	12mm Screws	2	(For mounting bracket Wall Mount Kit)
◗	16mm Screws	2	(For mounting bracket to wall)
◗	Rubber Feet	4
◗	Setup Guide	1	(This guide)
◗	Warranty Certificate	1

Precautions:

◗After properly connecting all the devices, turn ON the power to the Supply Adapter.

◗Always connect the Supply Adapter to the Receiver Adapter's POE port.

◗The Receiver and Supply cannot be attached by CAT5 longer then 100M.

◗Use POE CAT5 cables (all eight wires)

◗The products will become warm during use; this does not indicate malfunction.

PY00-29025-DM20