Buffalo Technology WLE-POE-R7, WLE-POE-R33 Installation, Mounting to the Wall Mount Kit

Installation

Mounting to the Wall Mount Kit

■NOTE: It is recommend to remove the Wall Mount Kit from the wall first.

◗Mount the attachment to the Wall Mount Kit as show in the following diagram.

AirStation

WLE-WK

Screws (12mm)

Attachment

◗Align the attachment screw holes (for mounting this product) with the screw holes on the rear panel of the POE Receiver, and secure with the 5mm screws.

◗With the POE Receiver attached to the Wall Mount Kit, mount the Wall Mount Kit to the wall.

Mounting to the Wall

◗Make two holes in the wall at the same distance apart as the mounting holes on the attachment bracket, and then mount the 16mm screws.

◗Align the attachment screw holes (for mounting the product) with the screw holes on the rear panel of the POE Receiver, and secure with the 5mm screws.

◗Suspend the attachment screw holes from the screws mounted to the wall.

Screw holes (for WLE-WK)

Attachment holes

Screw holes (for WLE-POE-R7/R33)

Standing on the Floor or Table

◗Affix the rubber feet provided in the product package to the indentations on the bottom panel of the POE receiver and then stand the product on the floor or table.

2