Advanced Settings
Normally, you won't need to change these settings. Here's explanations of each in case you do.
LinkTheater Advanced Settings
.
1 Press the power button and start LinkTheater.
*In order for you to distinguish between explanations concerning the television screen or computer screen, explanations about the television screen are marked with this icon
.
*Screens shown in this manual are examples. Your display may look slightly different.
2 Select [Settings], and press 
button.
3 You can configure each of these items.
• (Wired) Network settings
The following settings can be performed in [Edit Profile].
Obtain automatically (DHCP): If there is a DHCP server on the network, an IP address is assigned automatically.
Manual settings: You can also manually enter the IP address and subnet mask.
The settings are enabled by selecting the items edited above in [Profile selection], and pressing the [Select/Play] button on the remote control.
• Display settings
In [Screensaver], you can set the amount of time (1~60 minutes) before the screensaver starts on the television screen when there are no operations performed.
You can set the amount of time (3 seconds
—2 minutes) that a photograph is displayed on the television screen in [Photo display interval].
•(Firmware) Version
This displayes the firmware version number.
Using LinkTheater Detailed Configuration
Appendix
Mini LinkTheater User’s Manual