Buffalo Technology PC-P1LAN user manual Access restrictions screen, BootServer Management screen

Page 11

Access restrictions screen

BootServer Manager

 

You can set firmware rewrite (FW) and enable/

 

disable server functions using the BootServer

 

administration tool. Click [Start]-[(All) Programs]-

 

[BUFFALO]-[PC-P1LAN]-[BootServer Manager]

 

to start the tool.

 

BootServer Management screen

• Enable access restrictions

This setting enables access restrictions. This is not displayed if the settings are already enabled.

• Disable access restrictions

This setting disables access restrictions. This is not displayed if the settings are already disabled.

Only allow access from the following client devices

This setting only allows access from devices listed in [Restriction rules].

This cannot be selected when access restrictions are disabled.

Prohibit access from the following client devices

This setting prohibits access from the devices listed in [Restriction rules].

This cannot be selected when access restrictions are disabled.

• Add

This starts the Add access restrictions wizard.

You can set allow/prohibit conditions (host name, IP address, network address, MAC address) using this wizard.

This cannot be selected when access restrictions are disabled.

• Delete

You can delete conditions by selecting them in [Restriction rules] and clicking [Delete].

• Detect servers

This detects BootServer media servers on the network.

• Check all

This displays a check mark in the check boxes for all detected servers.

• Clear All

Removes all of the check mark displays.

• Update Firmware

This updates checked server firmware.

[FW version after rewrite] displays the version number after rewrite.

• Turn ON Server

Enables servers that have a check mark displayed.

• Turn OFF Server

Disables servers that have a check mark displayed.

*Do not disable all servers on the network, or the PC-P1LAN startup screen will not be displayed. You need at least one BootServer media server to use the LinkTheater.

Caution An icon is displayed in the task tray when your computer is running the BootServer media server. If no icon is displayed, the PC-P1LAN startup screen will not be displayed.

Click [Start]-[(All) Programs]- [BUFFALO]-[PC-P1LAN]-[PC-P1LAN BootServer] to launch the BootServer media server on your PC.

Using LinkTheater Detailed Configuration

Appendix

Mini LinkTheater User’s Manual 11

Image 11
Contents PC-P1LAN Contents Supported file formats Using LinkTheaterConverting data Registering a folder for playbackData playback on a television Conversion completed Click AddClick Turn on Access Click Add Control Configuring access restrictionsAppendix About Dlna Digital Living Network Alliance Playing back Dlna compatible media server dataDisplay settings LinkTheater Advanced SettingsPress the power button and start LinkTheater Wired Network settingsShared folder screen Media Server ConfigurationSettings screen BootServer Management screen Access restrictions screenAppendix Click the menu below and start the command promptComputer between Set a differentSet the same value Number from Set the same valueSelect Network, and press Select/Play button Button Press buttonStart LinkTheater Select Static, and press button Enter the IP addressYour LinkTheater is now configured with a static IP address Cannot see videos or hear sounds TroubleshootingCannot switch the power on Remote control doesn’t workWhen Trend Micro PC-Cillin 2003 is installed Cannot playback videos, music, or pictures When Trend Micro PC-Cillin 2002 is installedSound skips/frames dropping occur during playback Videos are not displayed correctlyIf you clicked Block Technical SupportGlossary CPU SpecificationsDisplay lamp specifications