Troubleshooting
Common Problems
•Out of range, client cannot connect to the AirStation.
•Configuration mismatch, client cannot connect to the AirStation.
•Absence or conflict with the Client Driver.
•Conflict of another device with the AirStation hardware.
LED Activity
Monitoring LED activity helps identify problems.
•Power LED should be Green,
•Wireless LED should be Green if the line is active. If is it blinking Green, wireless communication is active.
•Ethernet LED should be Green (100Mbps) or Amber (10Mbps) while the communication is active.
•The Red Diag LED will flash during boot and firmware updates.
DIAG LED Activity
Unplug the power for three seconds. Plug the power back in to monitor the Diag LEDs during
64