Buffalo Technology WHR-HP-G54 user manual Connecting your AirStation

Page 8

Connecting your AirStation

1.Power down the Cable or DSL modem and the computer which will be used to conﬁgure the AirStation router.

2.Plug the Cable or DSL’s LAN Ethernet cable into the AirStation’s WAN port. Initially, you may need to unplug this cable from your computer, hub or other router.

3.Plug the provided Ethernet cable into a LAN port on the AirStation and plug the other end into your computer’s Ethernet adapter (NIC). If you plan to initially conﬁgure the AirStation wirelessly (not recommended), you may skip this step.

4.Power on your cable or DSL modem and wait one full minute, then power on the AirStation router and wait one full minute, and ﬁnally power on the computer which will be used to conﬁgure the AirStation. If the red DIAG light on the AirStation is lit or ﬂashing after several minutes of being powered on, please consult Buffalo Technology Technical Support.

8

Image 8

Contents

High-Power Wireless Cable/DSL Smart Router Table of Contents Admin Conﬁguration Password Date/NTP Syslog Transfer Introduction System RequirementsBasic Setup Getting Ready Connecting your AirStation Log in to the Conﬁguration Tool Detecting Your Broadband Connection Home Aoss Aoss Notes Some things to keep in mindRouter/Access Point Mode Manual Client Conﬁguration System Info When you ﬁrst open your AirStation AirStation Conﬁguration Tool HomeInternet Games Port Mapping Firewall/Intrusion Detector Windows MSN Messinger/UPnP Wireless Encryption Wireless Channel Firmware Update Internet Connection Multisession Reset Advanced Settings WAN Conﬁg WAN Port PPPoE LAN Conﬁg LAN Port Advanced Dhcp Settings Dhcp Server Manual Assignment of IP Address Network Conﬁg Route Info Network Conﬁguration Edit Routing Information NAT NAT Manual Entry IP Filter IP Filter Add/Delete Basic Rules IP Filter Conﬁgure IP Filter Network Conﬁguration Intrusion Detector UPnP Aoss 802.11g Basic 802.11g Security Bridge/Repeater WDS Bridging MAC Access Limit MAC Access Limit Edit Registration List Admin Conﬁguration Name/Password Admin Conﬁg Date/NTP Syslog Transfer Save/Load Conﬁguration Initialize/Reboot Firmware Update System Information Log Information Packet Trafﬁc Information Client Monitor Ping Test Connecting to a Preexisting Network Antenna Speciﬁcations WHR-HP-G54 AirStation SpeciﬁcationsRadio Characteristics 270 m 885 ft 400 m 1300 ft 550 m 1750 ft Semi-Open Ofﬁce Environment 50 m 165 ft AirStation Ieee 802.11 Channel Sets Troubleshooting Common ProblemsDiag LED Activity Table Other Problems Troubleshooting WDS Setting up WDS the long version Click on the Advanced Settings tab Troubleshooting Troubleshooting Glossary Glossary MAC Medium Access Control Address To hardware that requires further manual conﬁguration Glossary Glossary Glossary FCC / CE Information FCC WarningPotential restrictive use Warranty Information Contact Information General InquiriesEmail sales@buffalo-technology.com 125* High Speed Mode

Related manuals

Manual 91 pages 37.89 Kb