Buffalo Technology LPV3-U2 user manual

To configure the protocol settings press the ‘Protocol Settings’ tab. The protocol options are TCP/IP, AppleTalk, NetBEUI, and SNMP. To configure a protocol, select it and press the ‘Properties’ button.

TCP/IP Settings:

Select the ‘Manual Setting’ option from the drop-down menu if a specific IP address is desired. Otherwise leave the setting on Automatic. With Automatic used, the device will obtain its IP from a DHCP server. Record the IP address of the printer. When the selection is made, press the ‘OK’ button.

NOTE: If DHCP is used, it is recommended to exit out of the program, reconnect to the Print Server through the Manager and record the new ‘discovered’ IP address. The IP address will be greyed out like above.

6