Step 3: Configure Wireless Settings (with AOSS)
Does your wireless client support AOSS? If so, then configuring your wireless network securely is very simple. To use AOSS, your router and client device should already be installed and powered on.
1. Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash.
2. Push the AOSS button on your client. Hold it in for a few seconds. If your client device is a PC card, CardBus, or USB adapter, its AOSS button will probably be in the Client Manager Software. Check the client device manual for instructions on where to push or click the AOSS button.
That’s it! It will take about 1 minute for the connection to complete. When it’s finished, the AOSS light will glow a solid amber, without blinking. You now have a secure network connection! Note: After pushing the first AOSS button, you have 2 minutes to press the second one.
Find the information you need to connect
Only one AOSS wireless client adapter can be configured with the AOSS router at a time. AOSS buttons must be pressed again to connect each additional AOSS wireless client adapter.
If your client device doesn’t support AOSS, or if you want to configure your client manually, turn to page 8.
Standalone
Client Device
PC card
Client Manager
Software