Figure 4.2.1A
WAN Port
Settings
Figure 4.2.1B
WAN Port
Settings
Figure 4.2.2
Network
Setup of
WAN
4.2 WAN Settings
4.2.1 WAN Port
Communication Method of Wired WAN
-Select port speed and type of duplex connecting to the WAN port. If unknown, select Auto negotiation.
MAC Address of WAN - Set the AirStation MAC address to be used for WAN com- munication.
IP Address of WAN - Allows administrator to select DHCP server, PPPoE, or manual setting for the WAN port of the AirStation.
Auto IP assignment from DHCP server - ac- quire the IP address automatically from the DHCP server.
Use PPPoE client - If selected, the infor- mation listed below must be entered.
Manual setting - Enter the appropriate IP address and subnet mask.
PPPoE Setting (for enabling PPPoE Client function) - Allows administrator to use PPPoE as specified by the ISP. The fol- lowing parameters should be entered:
User Name - Enter the user name (up to 64 alphanumeric characters) for PPPoE authorization.
Password - Enter password provided by ISP (up to 64 alphanumeric characters). Reenter password in the Confirmation box.
Service Name - Enter the PPPoE service name (up to 64 alphanumeric characters). If ISP doesn’t require service name, leave blank.
Connection Type - Select from:
•Continuous Connection - Connects immediately after setting and never disconnects.
•Connect on Demand - Reconnects when the Disconnect time elapses.
•Manual - Disables Automatic Con-
nection. Connects to Internet using the Connect button on the initial settings page.
12