Figure 2.1.2
AirStation
Setup:
Network
Adapter
Figure 2.1.3
AirStation
Selection
Figure 2.1.4
Configure IP
Address
system requires Explorer 4.0 or higher, or Netscape Communicator 4.0 or higher.
To set up the parameters manually, refer to Chapter 3. Before installation, verify the PC is set up for browsing the Internet.
1.Insert the CD into the CD drive. The following screen will appear. For AirStation setup, select “Setup the AirStation” and click OK.
2.The Network Adapter confirmation screen will appear. Verify the adapter shown matches that of the PC.
3.Click Next until a list of access points shows up in the
4.If the client IP range is different than the default AirStation IP of 192.168.11.1, an IP configuration screen will appear next. Select Automatically set up the IP address, or Specify an IP address for manual setup.