Optimus 31-3042 Using the Remote Control, Control Mode Buttons, Receiver/Amplifier Operation

Using the Remote Control

TUNER

CD	POWER	STATION
TAPE	BAND	FREQ
	FM	DIRECT
TUNER	MONO	CLASS ACCESS

	1	2	3
	TEST	REAR		Receiver/
	4	5	6
	TONE	LEVEL
	MODE	LEVEL		Amplifier
	CENTER	CENTER		Buttons
MODE	7	8	9
CONTROL
	DELAY	DISC
SURROUND	TIME	EFFECT
	0
	PRO LOGICDSP MODE		MUTING
	VIRTUAL	LOUD
RECEIVER			MASTER
POWER	FUNC	DIRECT	VOLUME

AUDIO/VIDEO

REMOTE OSR

RECEIVER POWER

The remote control works up to a distance of about 23 feet, and within a 30- degree angle on either side of the receiver. Point the control at the receiver’s front panel and press the desired button(s).

Many buttons on the remote control work the same as buttons on the receiver’s front panel. Use these buttons exactly as you would use the corresponding but- tons on the receiver.

CONTROL MODE Buttons

The three CONTROL MODE buttons select the device you connected to the CON- TROL OUT jack of the STAV-3770, CD player, VCR, or cassette deck.

Receiver/Amplifier Operation

Before operation, press TUNER to select receiver/amplifier operation.

STATION	Tunes to the next higher or lower memory location.
BAND	Selects the AM or FM tuner band.
FREQ	Tunes to radio stations.
FM MONO	Selects the FM reception mode.
CLASS	Selects the memory class.
DIRECT ACCESS	Allows direct input of the station frequency.
Number Buttons	Select the corresponding memory station. During Direct Access,
	enter the station’s frequency.
TEST TONE	Sounds test tones from each speaker when pressed after SUR-
	ROUND.

–REAR LEVEL + Controls the sound level of the rear speakers when pressed after

SURROUND.

CENTER MODE	Selects among the three center modes or 3CH Logic when
	pressed after SURROUND.

–CENTER LEVEL + Controls the sound level of the center speaker when pressed af- ter SURROUND.

DELAY TIME	Sets the rear-channel delay for Dolby Pro Logic Surround and
	Simulated Surround programs when pressed after SURROUND.
– EFFECT+	Adjusts the level of DSP or Dolby Virtual mode.
PRO LOGIC	Selects Dolby Pro Logic Surround.
DSP MODE	Selects the DSP mode; HALL, JAZZ, DANCE, THEATER 1, or
	THEATER 2.
MUTING	Silences the receiver. Press again to restore the sound to its pre-
	vious level.
VIRTUAL	Selects Dolby Virtual.
LOUD	Turns the loudness feature on and off.
FUNC	Selects a program source (VCR, PHONO, tuner, CD, or DVD/
	LD). Repeatedly press until the display shows the desired pro-
	gram source.

24