Zonet Technology ZEW2540P manual 802.11n Wireless USB Adapter

Page 10

802.11n Wireless USB Adapter

￿Network Type:

a.Infrastructure – A wireless Router and/or Access Point is required.

b.Ad-hocPeer-to-Peer network, no base station required.

￿TX Power:

Amount of transmit power used by the radio transceiver to send out signal. User can choose different value in the drop down menu

￿Preamble:

Only available under Ad-hoc mode. Value can be chose from Auto, Long, or Short

￿Threshold:

Frame size when RTS/CTS handshake performs before attempt to transmit.

a.RTS Threshold: Default value = 2347

b.Fragment Threshold: Default value = 2346 b. Authentication and Encryption

￿Authentication: Open, Shared, WPA(CCKM capable), WPA-PSK, WPA2(CCKM capable), WPA2-PSK, WPA-NONE

￿Encryption: None, WEP, TKIP, AES, TKIP(MFP), AES(MFP).

c. 802.1X

8

Image 10
Contents Page Page Table of Content Introduction Product FeatureContents of Package WelcomeInstallation 802.11n Wireless USB Adapter 802.11n Wireless USB Adapter Configuration Station ModeProfile 1.1 Add/Edit Profile802.11n Wireless USB Adapter Network Link StatusAdvanced Statistics6 WMM 7 WPS 8 SSO 9 CCXAP Mode Configuration Access Control Switch to Working Station mode MAC TableUse Zero Configuration 802.11n Wireless USB Adapter Advanced page configures firewall and connection sharing How to connect with PSP Configure PSP with Ad-Hoc mode802.11n Wireless USB Adapter Configure XLink Kai Product Specifications TroubleShooting 802.11n Wireless USB Adapter