Avocent DSR1021 manual DSRIQ-SRL module pinouts, To use History mode

Appendices 83

To use History mode:

1.Press Ctrl-F9to enter into History mode.

2.Press one of the following key combinations to perform the indicated action:

•Home: Move to the top of the buffer.

•End: Move to the bottom of the buffer.

•Page Up: Move up one buffer page.

•Page Down: Move down one buffer page.

•Up Arrow: Move up one buffer line.

•Down Arrow: Move down one buffer line.

•Ctrl-F8: Enter Configuration mode by opening the Configuration screen.

•Ctrl-F9: While in Configuration mode, return to the previous screen with History mode enabled.

•Ctrl-F10: While in Configuration mode, return to the previous screen with On-Line mode enabled.

•Ctrl-F11: Clear the history buffer. If you choose this option, a warning screen will appear. Press Enter to delete the history buffer, or Escape to cancel the action. The previous screen will reappear.

3.When finished, press Ctrl-F10to exit History mode and return to On-Line mode.

DSRIQ-SRL module pinouts

Table C.1: DSRIQ-SRL Module Pinouts

DB9-F	Host Signal		SRL Signal
Pin	Name/Description	Signal Flow	Name/Description
1	DCD - Data Carrier Detect	Out of SRL	DTR - Data Terminal Ready
2	RXD - Receive Data	Out of SRL	TXD - Transmit Data
3	TXD - Transmit Data	In to SRL	RXD - Receive Data
4	DTR - Data Terminal Ready	In to SRL	DSR - Data Set Ready
5	GND - Signal Ground	N/A	GND - Signal Ground
6	DSR - Data Set Ready	Out of SRL	DTR - Data Terminal Ready
7	RTS - Request to Send	In to SRL	CTS - Clear to Send
8	CTS - Clear to Send	Out of SRL	RTS - Request to Send
9	N/C - Not Connected	N/A	N/C - Not Connected